ENFORCE32371 - Laserfiche WebLink

Home Browse Search

2. The monitoring locations for each third party sampling event shall be designated by DMG in advance of the sampling event and shall be selected from the following approved monitoring locations: a. Groundwater Monitoring Wells M-6, M-7, M-8, M-9, M-12, M-13. b. Surface Water Monitoring Site RS-4, c. The Lower and Upper Tailings Ponds and the Cpllection Pond. In the event that DMG determines on the basis of third party sampling that monitoring data obtained from the tailings facilit}1 by BMRI are inaccurate or unreliable, DMG may direct the third party sampling contractor to conduct additional independent sampling and subsequent sample analysis in accordance with the requirements of this MOU, at the sole discretion of the DMG provided that such work is within the work description and budget set forth in the scope of wprk attached to the Contract. In the event that such work is not within the work description and budget set forth in the scope of work, then DMG may propose a change order to the Contract. B. Direction of Sampling Activity 1. The DMG, through its project manager, shall direct the sampling and analytical efforts of the third party sampling contractot. 2. BMRI shall provide the DMG project manager a schedule of its anticipated sampling activities which the DMG project. manager shall direct the third party sampling contractor to follow to' the maximum extent possible so that unnecessary redundant and duplicative sampling is avoided. 3. The DMG shall provide BMRI a minimum of five (5 working days notice to coordinate the sampling activity with its sam ling personnel or contractor. 4. In an effort to facilitate coordination and safe working cpnditions, third party sampling contractor shall report to BMRI personnel immediately upon arrival at the minesite and shall remain under tite direction of BMRI during the course of performing the sampling activity required hereunder. -3-