Laserfiche WebLink
Larry Reschke <br />November O1, 1991 <br />Page 2 <br />5. b. Powder and Cap Magazine - This feature does not <br />appear on Exhibit 8B as indicated in Table 2.05.3 <br />M, and the description on Page 171a is not adequate <br />to insure compliance with Rule 4.05.2(3). Please <br />specify whether the magazine fringes are gravel <br />covered, totally contained, or otherwise <br />controlled. <br />c. Cameo Storage Yard - This area is not clearly <br />delineated on Exhibit 8B. The gravel and straw <br />dike features should also be shown. <br />d. CRDA No. 1 - This area should be designated on <br />Exhibit 9B. Please specify the height of the berm <br />surrounding this area. Please note that 0.023 acre <br />feet of water within a 30' X 50' area will be about <br />8 inches deep, and not one inch as indicated in the <br />text. <br />e. Overland Conveyor - This area must be shown on an <br />exhibit (preferably lOB), and the berm height <br />should be specified. <br />f. Unit Train Loadout - This area must be identified <br />on a revised exhibit. Berm location and length <br />must be specified to verify storage depth. <br />g. North Decline - Although the outslope area of the <br />North Fan Portal was constructed during or prior to <br />1974, the area has since been in use by Powderhorn, <br />and therefore carries an ongoing reclamation <br />liability. As such, a sediment control plan is <br />necessary and should be submitted. <br />h. CRDA No. 2 Topsoil - Please submit more detailed <br />berm and ditch dimensions such that the ability of <br />these structures to contain the anticipated 0.056 <br />_acre feet of runoff can be verified. <br />i. CRDA No. 3 - Please submit more detailed berm and <br />ditch dimensions such that the ability of these <br />structures to contain the anticipated 0.085 acre <br />feet of runoff can be verified. <br />