Laserfiche WebLink
5.2.1.7 Surtac Gear Lube Storage in Mill <br />• Description: Sumac is a highly viscous petroleum grease product used to lubricate mill <br />machinery in the No. 3 MIlI. <br />Location: Various pallets in mill building. <br />Spill Potential: Very Low. <br />Potential Volume Spilled: One or two drums is the most likely amount spilled. <br />Countermeasures: Because Surtac is a highly viscous product, spills aze not likely to migrate <br />from the point of leakage. Therefore, containment is best accomplished with floor dry and <br />scooping the spilled material into a clean drum. If the spilled Surtac flows away from the leaky <br />drum, then sorbent booms or pillows may be required for containment. <br />Nearest C-ean-up Equipment: Spill kits aze located in the east and west ends of the mill <br />building.. <br />Visual Inspections and Integrity Testing: During mill operation Surtac storage is checked <br />daily; when shut down the Sumac storage is checked weekly. <br />Reporting: Ruptured drums resulting in the spillage of more than half a drum should be <br />documented on a "Spill Incident Report" form immediately (Appendix 1), and given to the <br />Environmental Department. <br />Conformance with Applicable Requirements: At the time of this writing (May 2004) the <br />Sumac Storage facilities in the mil] are in conformance with applicable regulatory requirements. <br />• <br />33 <br />