REV04422

• Permit No: M1980244
• IBM Index Class Name: Revision
• Doc Date: 5/5/2003
• Doc Name: Emergency Response Plan pgs 29-45
• From: CC&V
• To: DMG
• Media Type: D
• Archive: No

.,
MSDS -Diesel
Sinclair Oi] Corporation -August 2000
7. HANDLING AND STORAGE
' GENERAL:
Ground and bond all transfer and storage equipment. Drums must be grounded/ bonded/
' equipped with self- closing valves, pressure vacuum bungs and flame arrestors. Store
away from ignition sources in a cool area. Outside or detached storage is preferred.
' When handling use non-sparking toots and equipment. Do not use as a cleaner or solvent,
use only as fuel. Do not siphon by mouth.
' 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
1 ENGINEERING CONTROLS:
Provide ventilation sufficient to prevent exceeding recommended exposure limit or
build-up ofexpiosive concentrations ofvapor in air. Use explosion-proofequipmert.
PERSONAL PROTECTION:
RESPIRATOR:
Approved respiratory protection must be used when vapors or mist concentrations aze
unknown or exceed the TLV. Avoid prolonged or n-panted breathurg of vapor or mists.
PROTECTIVE CLOTHING:
Use fu[I-face shield, chemical goggles, impervious gloves, boots and whole body
protection
4. PHYSICAL AND CHEMICAL PROPERTIES
Vapor Pressure: < 1 PS[A
Specific Gravity: 0.75 - 0.90
SoiubiIity in Water. No
pli: N/A
Boiling Point: 550°F
Vapor Density: > 1
(Air = I )
Freeting Point: 0° F
Appearance: colorless, red, blue or amber ,
Physical State: Liquid
10. STABILITY AND REACTIVITY
GENERAL:
This product is stable.
INCOMPATIBLE MATERIALS AND CONDITIONS TO AVOID:
Strong acids, alkalies and oxidizers. Avoid heat, sparks, flame and static electricity.
Page 4 oF7