PERMFILE71505

• Permit No: M2002003
• IBM Index Class Name: Permit File
• Doc Name: FAX COVER
• From: DMG
• To: MEGAN KABELE
• Media Type: D
• Archive: No

Page 108
Hard RocklMetal Mining Rule 6
ttz(al (a) show name of Applicant;
tt2(al(al (b) must be prepared and signed by a registered land surveyor,
professional engineer, or other qualified person;
(c) give date prepazed;
tt2(al(~l (d) identify and outline the area that corresponds with the
application;
(e) with the exception of the map of the affected lands required in
Section 34-32-112(3)(e), C.R.S. 1484, as amended, shall be prepazed at a
scale that is appropriate to clearly show all elements that are required to be
delineated by the Act and these Rules. The acceptable range of map scales
shall not be lazger than 1 inch = 50 feet nor smaller than 1 inch = 660 feet.
Also, that a map scale, appropriate legend, map title, date and a north arrow
shall be included.
6.3 SPECIFIC PERMIT APPLICATION EXHIBI'T' REQUIREMENTS - 110 and
IlOd LIMITED IMPACT OPERATIONS
6.3.1 EXHIBIT A -Legal Description and Location Mau
(1) The legal description must identify the affected land, specify affected
azeas and be adequate to field locate the property. Description shall be by township,
range, and section, to at least the neazest quarter-quarter section. A metes and
bounds survey description is also acceptable. Also, the street address or lot
number(s) may be used. This information is available from the County Assessor's
office or U.S. Geological Survey (USGS) maps.
(2) Amap showing information sufficient to determine the location of the
affected land on the ground and existing and proposed roads or access routes to be
used in connection with the minis; operation. Names of all immediately adjacent
surface owners of record shall also be shown. The operation location map shall be
a standard 1:24,000 scale U.S. Geological Survey map. The location of the proposed
operation shall be shown and labeled with the mine site name.
6.3.2 EXHIBIT B -Site Description