Laserfiche WebLink
Rule:: Permits <br />(7) Coal Handling Structures <br />Coal Handling structures as identified on Map 2.05.3-1, Mine Plan, are described in the <br />Operations Plan above. Coal will be loaded on haul trucks by front end loader for <br />transport to the loadout. Coal will be end-dumped at the loadout and reclaimed by front <br />end loader to rail cars for transfer to the Picketwire preparation plant or direct shipment <br />to customers. <br />(8) Coal Mine Waste and Non-Coal Processing Waste <br />When necessary ,coal will be processed at the existing permitted Picketwire preparation <br />plant under a modification of the approved Permit C-81-012. <br />All waste oils and grease, waste paints and waste batteries will re recycled when feasible. <br />Waste oils and grease and waste batteries will be stored in the fuel storage area. The <br />waste oils and grease will be periodically picked up by an oil recovery service and <br />recycled or re-blended in accordance with all applicable state and federal guidelines. <br />Waste paints and household type materials will typically be used in a timely manner, with <br />little waste material remaining on site. However, waste paints that may not be <br />completely used will be recycled if possible through an approved facility. Those <br />materials that cannot be recycled will be periodically logged and inventoried for off-site <br />disposal at an approved facility. <br />2.05.4 RECLAMATION PLAN <br />The surface mines will be reclaimed as mining activities are complete. Reclamation <br />activities will require a period of approximately four to five months, which will include <br />salvage and removal of structures, backfill and grading, topsoiling and seeding. These <br />activities are further described in the sections below. <br />Backtilling and Grading <br />The reclamation plan will result in the site being returned to approximate original <br />contour. The post-mining topography is presented in Map 2.05.4-1 and is supported by <br />Figures 2.05.4-1 through 2.05.4-14c. Figures 2.05.4-14d through 2.05.4-141 illustrate <br />designs for fills I through 9, respectively. <br />s <br />PR-~ 1 <br />LorencitaPmt(475)Ju1y2001.wpd 2.05-40 (Revised 8-16-O1) <br />