HYDRO26997

• Permit No: C1982057
• IBM Index Class Name: Hydrology
• Doc Date: 9/23/1996
• Doc Name: 3rd Qtr 1996 Sediment Pond Inspections
• From: SENECA COAL CO
• To: DMG
• Permit Index Doc Type: SEDIMENT POND INSPECTIONS
• Media Type: D
• Archive: No

PERIODIC INSPECTION FORM
Water, Sediment, or Slurry Impoundments
INSPECTOR'S NAME: Michael Altavilla DATE: 09/18/96
NPDES I.D. NO.: CO-0000221 D.P. 005
FACILITY CONFIGURATION: Cross-Valley Pond DATE LAST INSPECTION: 06/05/96
SITE NAME: Pond #005 LOCATION: NWS: SW'b. Sec. 10. TSN. R88W
MINE NAME: Seneca II-W Mine (Seneca Coal Co) LOCATION: 8 mi. S of Hayden. CO
MINE I.D. NO.: CMLRD Permit No. C-82-057 OWNER'S REP.: Brad Brown. Gen Mor
Circle or write in ecorocriate reaoonae
1
2
3
4
5
6
7.
8.
9.
10
11
12
13
14
15
16
17
18
19
20
Foundation preparation (removal of vegetation, stumps, topsoil: es No N/A
Lift thickness: ~~ in. N/A
Compaction according to approved plan: es No N/A
Burning (specify extent and location): Yes No
Angle of slope: 3.5:1 upstream, 2.5:1 downstream Total = 6:1 N/A
*Seepage (specify location, color, and approximate volume)
From underdrain pipes:
At isolated points on embankment slopes:
At natural hillside:
Over widespread areas:
From downstream foundation area:
"Boils" beneath stream or ponded water:
Cracks or scarps on crest:
Cracks or scarps on slope:
Sloughing or bulging on slope:
+Maj or erosion problems:
Surface movements in valley bottom or on hillside:
+Eroaion of toe:
+Water impounded against toe:
Existing embankment freeboard: Aooroximately
Increase 7 Decrease in water level:
Cracks, bulging, or erosion on upstream face:
Visible sumps or sinkholes in slurry surface:
*Clogging
Spillway channels and pipes:
Decant system:
Diversion ditches:
*Crackinq or crushing of pipes
Spillway pipes:
Decant system:
Trash racks clear and in place:
Yes ~
Yes No N/A
Yes N/A
Yes N/A
Yes o N/A
Yes o N/A
Yes o N/A
Yes N/A
Yes N/A
Yes N/A
Yes o N/A
Yes N/A
Yes N N/A
11.4 feet
2.0 feet
Yes ~ N A
Yes No /A
Yes ~ N/A
Yes No
Yes ® N
Yes ® NJa,
Yes No N A
Yes No N/A
*Maj or adverse changes in these items could cause instability and should be reported to the
Engineering Manager and Mine Superintendent for further evaluation. Adverse conditions noted
in these items should normally be described (extent, location, volume, etc.) in the space on
the back of this sheet.