HYDRO26824 - Laserfiche WebLink

Home Browse Search

C~ A. TERMS AND CONDITIONS 1. Effluent Limitations (Cont.) • PART I Page lc of 19 Permit No. CO-0032115 d) Discharge points 001, 002, 003, DOS, 006, 008, 009, 010, 011, 012, 013 and 014 (Cont.) Parameter Daily Maximum c/ ' - ~ Flow, MGD Report Settleable Solids, ml/1 j/ 0.5 Total Dissolved Solids, mg/1 Report For 003, 006, 008, 009, 010, 011, 012, 013 and 014, pH (standard ,.t,' units) shall remain between 6.5 and 9.0 c/. `~~'' For 001, 002 and 005 only, pH (standard units) shall remain ~~^tr between 6.5 and 9.5, during the months of June through September. ~:' The pH range of 6.5-9.0 s.u. shall apply at all other times c/. Oil and grease shall not exceed 10 mg/1 c/ in any grab sample nor shall there be a visible sheen f/. Any discharge or increase in volume of a discharge caused by precipitation within any 24-hour period greater than the 10-year, 24-hour event (or series of storms or snowmelt of equivalent volume may comply with the following limitations subject to burden of proof requirements described in Part I.A.2. Flow, MGD - monitoring only per Part I.B.1. Total Dissolved Solids - monitoring only per Part I.B.1. pH shall remain between 6.5 and 9.0 s.u. c/. Oil and grease shall not exceed 10 mg/1 c7 in any grab sample nor shall there be a visible sheen f/. Additional conditions - effective at all times: There shall be no discharge of floating solids or visible foam in other than trace amounts. The discharge shall not contain any sanitary wastewaters from toilets or related facilities, or other pollutants not associated with active mining operations. There shall be no ]and application of wastewater, other than for dust control, without [he previous authorization of a specific discharge point. 2. Burden of Proof Requirements - 001, 002, 003, 005, 006, 008, 009, 010, 011, 012, 013 and 014 ` The permittee shall have the burden of proof when requesting relief J\ from total suspended solids (TSS), total iron and/or settleable solids limitations.