My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
HYDRO25364
DRMS
>
Back File Migration
>
Hydrology
>
HYDRO25364
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 8:45:08 PM
Creation date
11/20/2007 5:29:56 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1981018
IBM Index Class Name
Hydrology
Doc Date
6/22/1998
Doc Name
SPILL PREVENTION CONTROL AND COUNTERMEASURE PLAN
Permit Index Doc Type
NPDES
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
12
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
The following materialswill be used to contain and absorb spilled material and to neutralize <br />the product. <br />Aluminum Sulfate -ENACT 7783 NALCO Product (Use for Emulsion Oil Spills in <br />underground workings. <br />Zymeflow Enzyme Based Grease Predigester -United Laboratories Product 655 (Use for <br />Emulsion Oil Spill recovery, surface or underground. <br />BOYCO OIL Absorbent <br />Straw <br />Rags <br />Powdered Limestone (Calcium Cazbonate) <br />All such materials, afrer use, will be promptly discazded in an approved manner as stated in <br />the product MSDS sheet. The materials listed above are stored at the mine site at all times <br />and can be replenished within 24 hours if supplies are depleted. Adequate supplies of the <br />material will be stockpiled to handle most leak or spill situations. <br />The following plan should be followed in case of a significant leak or spill of underground <br />emulsion oil from the longwall hydraulic system. Contaminated water should be contained <br />in the underground sump. ECO Recovery Systems Inc. will be contacted to mobilize the <br />necessary equipment for removal of oil from sump water discharge. NALCO ENACT 7783 <br />(Aluminum Sulfate) can be used to flocculate oil. The flocculated oil can be removed with <br />a combination of centrifuge extraction followed by filtration of centrifuge effluent at ] 0 <br />microns. This can be done utilizing the ECO Recovery Systems Inc. leased equipment for <br />decontaminating the sump water. Using a chemical injection pump, inject ENACT <br />Aluminum Sulfate at 83 ppm into the treatment stream. This will effectively flocculate the <br />emulsion oil out of the contaminated water. Then use the ECO Recovery Systems Inc. <br />centrifugation and filtration trailers for final affluent (See Appendix C). <br />United Laboratories Product 655 "Zymeflow" will also be used as an emulsion oil digester <br />for small leaks and spills on site. This biodegradable enryme has been shown to break down <br />emulsion oil out of sump water and is non-toxic to aquatic life. This product has been <br />included in Deserado Mine's NPDES discharge permit for use on the mine site. <br />Oil and fuel spills containing oil residue and/or fuels in diked areas will not be allowed to <br />accumulate and will be promptly removed and disposed of. <br />6/22/98 <br />
The URL can be used to link to this page
Your browser does not support the video tag.