My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
PERMFILE54613
DRMS
>
Back File Migration
>
Permit File
>
600000
>
PERMFILE54613
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 10:57:40 PM
Creation date
11/20/2007 4:14:14 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1981010A
IBM Index Class Name
Permit File
Doc Date
12/11/2001
Doc Name
DESIGN AND CONSTUCTION SPECIFICATIONS FOR HAULROADS
Section_Exhibit Name
APPENDIX S
Media Type
D
Archive
Yes
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
40
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
<br />During the cons[ructicn of the haulroad and prior to excavation <br />to final sub grade level, the OSvTlER shall inspect subsurface to <br />~~'?~ determine the er.istence of unsuitable material to be excavated. <br />• Select material may be obtained from other excavated areas or <br />from nearby borrow, as approved. <br />Cut slopes shall be dressed Co provide a smooth transition with <br />adjacent slopes. <br />B. Borrow: <br />Select or suitable materials will be obtained from required exca- <br />vation as approved by [he OWNER, or from borrow areas on the pro- <br />perty. Remove vegetation and other unsuitable material from area <br />prior to excavating. Conduct operations to provide a smooth <br />transition with adjacent areas and to insure proper drainage away <br />from the area. Strip topsoil and stockpile at location chosen by <br />OWNER. Replace topsoil with included organic material on borrow <br />areas. <br />E1.06 -Embankments <br />A. General: <br />Fill with suitable materials to rough finish grades and side- <br />slopes shocm, in conformance with requirements for filling, as <br />specified below, existing depressions and holes, and those left <br />by grubbing, scalping or excavation. <br />After stripping and/or excavation and prior to placing fill on <br />areas to receive fill, OW::ER shall examine surfaces to determine <br />in-place density and whether exposed materials ar.e suitable. <br />Unless indicated otherwise, where density is below that speci- <br />fied, scarify subgrade to dept}cs as listed below, semipulverize <br />,~ material in place by scarifying and recompact to specified <br />density. <br />S-8 <br />
The URL can be used to link to this page
Your browser does not support the video tag.