Laserfiche WebLink
<br />PART I <br />Page lb of 19 <br />Permit No. CO-0032115 <br />A. TERMS AND CONDTTIONS <br />1. Effluent Limitations (continued) <br />(a) Outfalls 008 and 010 (continued) <br />Any discharge or increase in volume of a discharge caused by precipitation within any 24-hour period <br />greater than the 10-veaz. 24-hour event (or series of storms or snowmelt of equivalent wlume) i~ comply <br />with the following limitations subject to burden of proof requirements described in Part I.A.2. <br />Effluent Parameter <br />Flow, MGD <br />Total Suspended Solids, mg/C <br />Total Iron, mg/P <br />Settleable Solids, mP/P <br />pH, s.u. (minimum-maximum) <br />Oil and Grease, mg/2 <br />(b) Outfall 012 <br />Discharge Limitations <br />30-Day Ave Daily Max <br />Report Report <br />Report Report <br />Report Report <br />N/A Report <br />N/A 6.5-9.0 <br />N/A 10 <br />PRIMARY LII4TATIONS <br />Effluent Parameter <br />Flow, MGD <br />Total Suspended Solids, mg/P <br />Total Iron, mg/2 <br />Settleable Solids, mP/2 <br />pH, s.u.(minimum-maximum) <br />Oil and Grease, mg/2 <br />Discharge Limitations <br />30-Day Avg Daily Max <br />Report Report <br />35 70 <br />3.0 6.0 <br />N/A Report <br />N/A 6.5-9.0 <br />N/A 10 <br />ALTERNATE LIMITATIONS <br />Any discharge or increase in the volime of a dischazge caused by precipitation within any 24-hour period <br />less than or equal to the 10-vear. 24-hour precipitation event (or snowmelt of equivalent volume) may <br />compl}~ n2th the following limitations subject to burden of proof requirements described in Part I.A.2. <br />Effluent Parameter <br />Flow, MCD <br />Total Suspended Solids, mg/2 <br />Total Iron, mg/P <br />Settleable Solids, mQ/2 <br />pH, s.u.(minirtwn-maximum) <br />Oil and Grease, mg/2 <br />Discharge Limitations <br />30-Dav Ave Daily Max <br />Report Report <br />Report Report <br />Report Report <br />N/A 0.5 <br />N/A 6.5-9.0 <br />N/A 10 <br />Amendment 2 Issued 03/15/94 Effective 05/01/94 <br />Amendment 4 Issued Effective <br />See Part I.C. for Definitions. <br />