Laserfiche WebLink
SECTION 02777.0 GEOTEX'I'II.E <br /> <br />PART 1: GENERAL <br />1.01 SUMMARY: <br />This SPECIFICATION describes requvements for the manufacture, supply, and installation of the geotextile in the <br />Underdrains, and Leak Detection System, as shown on the DRAWINGS; and construction quality control <br />monitoring. Alt procedures, operations and methods shall be in strict compliance with the SPECIFICATIONS, the <br />Construction Quality Assurance Plan, and the DRAWINGS. <br />1.02 SUBMITTALS: <br />A. Submittals With Bid Documents <br />CONTRACTOR shall provide the following information relating to the geotextile MANUFACTURER with its <br />proposal. <br />Information from MANUFACTURER including company name, address, telephone <br />number, the names of the company president and quality contro[ manager, and narrative <br />of the company history. <br />2. Description of MANUFACTURER'S manufacturing capabilities: <br />• <br />a. Information on plant size, equipment, personnel, number of shifts per day, and <br />capacity per shift. <br />b. A list of standazd material properties and test methods employed [o arrive at <br />the values for each. As a minimum, the list shall include properties given in <br />Part 2 of this Section. <br />3. The Quality Control Manual followed during the manufacturing process including those <br />for the polymer material and for detecting foreign objects in the finished goods, and a <br />description of the quality control laboratory facilities, including the name and telephone <br />number of the quality control manager. Upon review of the Quality Control Manual, <br />the MANAGER and CERTIFYING ENGINEER may request additional testing <br />during the manufacturing process at no additional cost [o CC& V. <br />B. CONTRACTOR shall provide the following information after contract award but within ten <br />(10) days prior to material arrival on-site and prior to commencement of the work: <br />I. The geotextile MANUFACTURER shall provide written certification that the geotextile <br />to be used meets the requvements of the Cresson Project and has been continuously <br />inspected for the presence of needles and geotextile was found to be needle free. <br />2. A copy of the MANUFACTURER'S geotextile QC test results of properties outlined in <br />Part 2 of this Section. The MANAGER reserves the right to refuse use of any <br />geotextile supplied without the proper QC documentation. <br />3. A detailed list of performance criteria for the geosynthetic material being produced for <br />this project. (Note: Performance criteria are sometimes refered to as "minimum <br />property values". Refer to Part 2 of this Section for geotextile properties and test <br />methods.) <br />• 1.03 QUALITY ASSURANCE: <br />Section 02777 Page 1 of 5 <br />Geotextile Golder Associates <br />I \00~220]W9 W~CERiREPJ80241PPE1W$NPPEA2'lT1RZDOC <br />December 9, 1998 <br />Revision 2 <br />