PERMFILE47866

• Permit No: M1980244
• IBM Index Class Name: Permit File
• Doc Date: 9/3/2002
• Doc Name: Certifcation Report Phase IVa
• From: Cripple Creek & Victor Gold
• To: DMG
• Media Type: D
• Archive: No

•
•
TYPICAI: PROPERTIES'-}TABLE"Z Ol B
^~'
~~ "'"
"
3~'~~~" " ~ ` ''~ `~ ~ ~i `"``'~ ~p
~
, ~
~
,
t ~
ti
Property 1. t ~ ,.. ~ ' ~ tom" a ~F
Test Method °' ,; f ,~ h 7 3~.%+dx ,..: 'L~1~'"i",, °'_ 3j%
~„Smooth'100 mtl a -P & "~.~'x+k'l~. tae p^ ,~"t~'
i Tetctured.100 mIl' '"

~~'
'
a
~` Llil)PE
w
'LLDPEj
r. ~ r ;~~ r
r
Thickness (mils)Z GRI-GM8 90 (min)/100 (min) 90 (min)/100 (min)'
Compound Density (g/cc) ASTM D 1505 0.939 (max) 0.939 (max)
Cazbon Black Dispersion ASTM D3015 Al, A2, A3 Al, A2, A3
Cazbon Black Content (°/a) ASTM D 1603 2-3 2-3
Tensile Properties
I. Ultimate Tensile Strength (ppi) ASTM D 638, NSF 54 380 (min) 180 (min)
2. Ultimate Elongation (%)(2.5" gauge) ASTM D 638, NSF 54 480 (min) 300 (min)
Puncture Resistance (Ibs J ASTM D 4833 150 (min) 130 (min)
Field Seam Properties°
1. Shear Strength (ppi) ASTM D4437 (modified NSF 54) 130 (min) 130 (min)
2. Peel Strength° (Inside and outside tracks for
fusion welds) ASTM D4437 (modified NSF 54) 110 (min), FTB6']'g 100 (min), FTBb']'g
Notes:
~ LLDPE refers to Linear Low Density Polyethylene and VLDPE refers to Very Low Density Polyethylene.
~ First value represents lowest individual value. Second value represents minimum average mll value.
' Core Thickness, exclusive of textured surfaw.
° Seam strength refers to both fusion and exwded seams Cor t J nPE [o LLDPE welds.
5 If peel strength exceeds ultimate tensile strength ofthe sheet but the sample fails FTB, Ne test will be considered a pass.
6 Federal Test Method Standards.
7 Fihn Tear Bond (F I'B) is defined as failure of one of the sheets by tearing, instead of separating from the oNer sheet at the weld interface area (sheet faik before weld).
Section 02776 Page ] 0 of 20 October 25, 2000
Geomembrane Golder Associates Revision 8
I:~LOt220J~ll0001CER77tEP0802WPPENDSUPPEt991-209902]]61RB.DOC