PERMFILE47866

• Permit No: M1980244
• IBM Index Class Name: Permit File
• Doc Date: 9/3/2002
• Doc Name: Certifcation Report Phase IVa
• From: Cripple Creek & Victor Gold
• To: DMG
• Media Type: D
• Archive: No

- observe prepazed subgrade prior to geosynthetic deployment;
• - monitor and document geosyndtetic material placement, trial seam testing, non-
destructive testing, seaming and repair operations, and destructive testing;
- identify seam samples for CQA destructive testing;
- asstue that testing equipment used, and tests performed aze conducted according to
project SPECIFICATIONS and industry standazds;
- perform or observe, document, and report test results to MANAGER as required;
- report any deficiencies to MANAGER that aze not corrected to the satisfaction of the
CQA Monitor, including design or project SPECIFICATION changes; and
- prepaze a Constuction Certification Report describing the construction, any deviations
from SPECIFICATIONS or, DRAWINGS and details, details of all field and laboratory
details, subgrade acceptance forms, test data, tests results (both labomtory and field), QC
submittals, geomembrane panel layout as-built prepazed by the CQA Monitor,
professional certification that construction was completed in compliance with the
DRAWINGS and SPECIFICATIONS. The report will be sigtted and sealed by [he
CERTIFYING ENGINEER registered in the State of Colorado.
2.06 GEOSYNTHETICS MANUFACTURER:
• The Geosynthetics Manufacturer, also referred to as the "MANUFACTURER", is responsible for
production of the geosynthetic components outlined in this plan. Each MANUFACTURER must verify
prior to constmction that the MANUFACTURER can produce material that meets the requirements
outlined in project SPECIFICATIONS.
2.07 GEOSYNTHETICS INSTALLATION CONTRACTOR:
The Geosynthe[ics Installation Contractor, also referred to as [he "CONTRACTOR" or
"INSTALLER", is responsible for installation of the geosynthetic components, as outlined in the
project SPECIFICATIONS.
The INSTALLER must meet the requirements outlined in the project SPECIFICATIONS.
The INSTALLER will be responsible for storage, handling, deploying, temporary geomembrane
anchoring, seaming, repatrs and non-destructive testing, in accordance with the project plans,
SPECIFICATIONS and the INSTALLER'S internal quality control program. It is the INSTALLER'S
responsibility to see that all submittals aze received as outlined in the project SPECIFICATIONS.
2.08 EARTHWORKS CONTRACTOR:
The Earthworks Contractor, also referred to as "CONTRACTOR" is responsible for proper delivery
and placement of earthwork components as outlined in the project SPECIFICATIONS.
PART 3.0 LINES OF COMMUNICATION
• The CQA Monitor shall be capable of direct communication with the MANAGER, DESIGN
ENGINEER, CERTIFYING ENGINEER and CONTRACTOR at all times. Deficiencies that can
Section 01400.2 Page 3 of i 1 Mazch 22, 2000
Geosynthetic CQA Plan Golder AssocioTes Revision 5
I:1 W\2203\0900\CERTREPo802W PPENDSW PPE\014003RS.DOC