PERMFILE46297

• Permit No: M1988112
• IBM Index Class Name: Permit File
• Doc Date: 11/8/1988
• Section_Exhibit Name: APPENDIX N TECHNICAL SPECIFICATIONS
• Media Type: D
• Archive: No

The Contractor shall maintain and protect fills in a condition
satisfactory to the Engineer at all times until the final
completion and acceptance of the work. Any approved fill material
which becomes unsuitable for any reasons whatsoever, after being
' placed in the fill and before final acceptance of the work, shall
be removed and replaced in a manner satisfactory to the Engineer by
the Contractor at his own cost.
6.9 Compaction Equipment

6.9.1 General
I
The Contractor shall provide sufficient compaction
' equipment of the types and sizes specified herein as is
necessary for compaction of the various fill ma=erials as
specified in Section 6.2. The Contractor will be
itt
d t
i
l
i
perm
o use a
ternat
e
ve equ
pment, provided the
Contractor can demonstrate to the Engineer :hat such
alternate equipment will compact the fill material to a
density not less than that which would be produced by the
equipment specified; and that no undesirable features,
such as stratification, will occur with the proposed
alternate equipment. If the Contractor wishes; to use
alternative equipment, he shall submit to the Engineer
' for approval complete details of said equipment: and the
d
h
d
i
'
met
o
s propose
for
ts use. The Engineer
s aporoval of
the use of alternative equipment will be conditional upon
1 the Contractor's construction of test fills at his own
expense. Any approval of alternate equipment will not
I relieve the Contractor from responsibility of ~~btaining
the specified compaction.
Tractors used for pulling compaction equipment shall
have sufficient power for the most adverse conditions to
be encountered during compaction of the fill and when the
compaction equipment is ballasted to the maximwn weight
N-17