PERMFILE45486

• Permit No: M2005051
• IBM Index Class Name: Permit File
• Doc Date: 10/17/2005
• Doc Name: Adequacy Response
• From: ACA Products Inc.
• To: DMG
• Media Type: D
• Archive: No

4.12.8 With the excepGar of traffic oonfrd or safety devices, no above ground
1 ~' obstructions may be within 10' of the traveled way.
I
~ 4.12.7 Cut slopes shah be a maximum of 1.5 (horimntal) to 1 (vertical) unless tesigned
~ by a professional engineer. Fill stapes greater thanl0 feet shall be designed by a
I professional engineer.
4.12.8 All disturbed areas outside of the traveled way and shoulder shall be revegetated
in accordance with an approved weed management plan. Erosion control
devioea may be required t0 be installed in roadside ditches to reduce sediment
transport
1.12.9 The developer shalt provide an as-constructed road plan and profile to the
County Road and Bridge Department
4.13 GENERAL ORflrEVYAY LONSTRUCTiON STANDAI~9:
This s II appy to all driveways, including those less than 500 feet.
4.13.1 ximum grade for driveways is 12%. Roadway designs and subdivision plans
must show that all lot access can be addeved within the 12%. ConstruGed
~.~'~'~ driveways must oonfofm to this spedfication.
4.13.2 Preferred driveway to road angle of access is 90 degrees. A driveway shall
rrot access a road at an angle of less ttran 80 degrees.
4.13.3 Minimum driveway clearance width is 12 feet. Any driveway that provides
access Oo more elan two bts shall be 24 feet wide.
13. curves must provide for access by a 35-foot wtteel-base fue truck.
4.1 .5 minimum radius of 15 feet measured at the edges of the driveway and traveled
lane is required at the traveled roadway intersection.
4.13.a Driveways must have a minimum of a 13' 8' height clearance.
4.13.7 Driveway designs shall divert drainage away from the traveled roadway.
4.13.a Driveways must have culvert sized for the barrow ditch drainage requirement at
the roadway intersection unless k can be clearly shown that roadside drainage is
not impeded during a 100-year storm. The minimum Culvert size Is 18' diameter
and not less than 18 feet Fong regardless of drainage requirements. All
driveways shalt have a culvert unless approval by the County Road and Bridge
Department
4.13.8 Atwve grade driveway improvements must not intrude into the right-of-way
easement. Improvements shall be removed at the owners expense if they are
not removed within 30 days notice from any public right-of-vaay.
4.13.1 riveways accessing a Canty Road must have a minimum positive 29i grade to
the traveled road surface for not less than 12 feet.
4.14 REFERENCES:
References used in creating this standard and recommended for use when designing and
constructing roads are listed below. The list Is not intended to act as a bibliography or an all-
inclusive list. It is merely intended to provide users of this code with reference materials. In
cases of conflict arising between this code and any other source, this code shall take
~ precedence unless the code spedttcally dtes the reference.
ChaNee County Land tJse Code Road Standards (6000 Aaoprea r r~pg62} 4.12
d 8b51L11Z89'aN/ZS