Laserfiche WebLink
FPF. _19-??_MON 03:55 PM SCI LRN-SCgPE 303 27£ 1671 <br />• • <br />BCI LANDSCAPE CONTRACTORS, INC. <br />6 3 3 EYHLBiT (' - lbij~ni~ng_Plan <br />(d) The thickness of the flagstone we will be mining will <br />range from 112" to 8" thick pieces, with a total height of any pit <br />wall at 20 to 30 feet. <br />(e) We will be using the existing road (as shown on 6.3.1 <br />Exhibit Map) and a spur road that runs directly below the quarry <br />pits. The spur road will be used by the loader to transport pallets <br />to staging area, which is off the main road. Our office and all <br />maintenance operations will be performed offsite. <br />(f) The existing quarry pit floors will be enlazged 10-20 <br />feet in diameter and the pit walls will increase in height by 20-30 <br />feet. The waste rock stockpiles generated during the quarrying <br />process should not exceed 20 feet in diameter by 5 feet in height. <br />~ ~ ~- This waste rock will be used in the reclamation rocess. <br />A.r :-. - < <br />=-• Pre-Mining `°" ~ Post Mining st LZeclamation <br />.~ - _ <br />1`^"~ l~~ 9 (cork' acaSS~ `.- =, yU~~ ._'_ b0~~ l~ <br />., ~ ..- seed Ix'~' <br />(g) The existing main road averages 14' wide at the widest <br />point and 12' wide and the smallest point. The road is composed <br />of gravel, soil and stone, sufficient for a large truck to access. We <br />do not plan to improve the road. There are no drainage or runoff <br />problems. T'he lateral road is approximately 8' wide, sufficient to <br />drive a loader with pallets. <br />P.05 <br />ifp <br />pC..Tst:~nt (..irt' <br />~:cmc rnck- <br />(h) There is no water required to quarry flagstone. <br />