APPCOR10641

• Permit No: C1996084
• IBM Index Class Name: Application Correspondence
• Doc Name: Initial adequacy review
• Media Type: D
• Archive: No

r~
• information, or state how and when this design will be submitted in the future.
98. Several sections of the Boazd's Regulations require the application to contain information
pertaining to distances to certain items from the permit azea, the blasting area, the affected
area, etc. Please provide the following information. If some or all of this information
is already contained in the application, please discuss where it may be located for
continued review.
a) Please provide a map that indicates the on-the-ground boundary limits of the
blasting areas of the surface mine (Sections 4.08.3(2)(b)(i), 4.08.4(3), 4.08.4(4),
4.08.4(7), 4.08.4(8), and 4.08.4(10)).
b) On this same map, please indicate the location of the dwelling or other occupied
structure nearest the blasting area limit, and indicate the point that lies halfway
between this structure and the blasting area limit. Identify this halfway point as
the "fly rock travel limit" (Section 4.08.4(8)).
f c) On this same map, please indicate the boundary of the azea to which access by
unauthorized personnel and livestock will be regulated and controlled (Sections
4.08.4(5) and 4.08.4(8)). Designate this the "regulated access area". Please note
~u tl 15 '1 that, pursuant to Section 4.08.4(8), if the "regulated access area" limit is
`~~' / ~~`1 designated to be closer to the blasting azea limit than the point halfway between
r~5 ~ /~pT the blasting azea limit and the nearest occupied structure, the "regulated access
,AI-~ azea" limit will become the "fly rock travel limit", as fly rock may not travel
~V`" ~ beyond the "regulated access azea" limit.
w°x ~ d) Please identify on a map the location of all dwellings, public buildings, schools,
churches, community buildings, and institution buildings within one mile of the
blasting azea limit. Please identify the permit azea boundary on this same map
(Section 4.08.4(10)). This will assist the Division in determining what maximum
allowable peak particle velocities for ground vibrations may apply to certain
structures in the vicinity of the mine.
e) [n addition to the information provided above, please also provide the location of
`~ any hospitals or nursing facilities within 1000 feet of the blasting area limit
(w~ (Section 4.08.4(7)(a)), and the locations of structures such as, but not limited to,
those described in Section 4.08.4(7)(b) that lie within 500 feet of the blasting area
limit.
f) If not already done so by the information requested above, indicate the locations
of all structures (roads, irrigation ditches, wells, head gates, power poles,
underground cables, pipelines, livestock tanks, culverts, sheds, barns, garages, and
rail lines) that lie within one half mile of the blasting area limit (Section 4.08.2(1)
. and 4.08.4(4)). This will assist in the Division in determining which entities may
be entitled to notices regarding pre-blast surveys, blasting schedules, and blasting.