Laserfiche WebLink
<br />SAR <br />The Wyoming Guidelimes established a suspect level for <br />this parameter at 16 or greater. The range of values is 0.8 <br />tq 35 5; Only one (1) sample has a value greater that the <br />Wyoming Guidelines and it is again sample CIO and will be <br />buried deep in the fill to ensure non-contamination of water <br />in the area. <br />Calcium <br />The calcium values are used to calculate the SAR values <br /> <br />and range from 0.5 to 11.1 meg/1. <br />Flour.ide <br />The levels of flouride range from 0.3 to 10.5 `/g/ml <br />except for the floor rock of the Cass seam which was 28.2yg/ml. <br />This material will be treated so that it is exposed the lease <br />amount of time possible. <br />Magnesium <br />The values for magnesium ranged from 0.4 to 5.0 meg/1 <br />These values are used to calculate the SAR values. <br />Nitrate <br />The values for this parameter range from 0.01 to 0.11 meg/1 <br />• <br />which are well below the 20 ppm toxicity levels established in <br />the Montana Overburden Guidelines. <br /> <br />160 <br />