Laserfiche WebLink
MINING AND MINE METHODS. <br />The main opening, is the O'Neil shaft, 4 x 8 in the <br />clear, 2 compartments, bucket and ladder vray, 878 ft, deep, <br />The shaft dips to the S, E, ~2 ft, in the first 3O0 ft „ belovr <br />which, it straightens up to the bottom, The shaft is timbered <br />with atolls, and square sets; provided with a good bucket <br />road, skids being 4 x 4's, lagged, and ladder road, with <br />occasional landings, <br />The collar of the shaft is located 250 ft, S, i:r, of the <br />N.E. end line of the O'Neil lade, and. is provided vrith gates <br />on two sides, the third side being closed by automatic door, <br />vrhile the 4th side is left open. The shaft has the following <br />levels running from it:- <br />200 ft, level, Ext,N,E. S,!+r, <br />269 „ „ „ <br />'u58 „ „ S,1^I, 582 ft. connecting with tun, <br />464 „ <br />566 <br />666 „ <br />766 „ <br />866 „ ., <br />Hoisting is done by bucket, attached to a 7~8 in,. <br />Roebling steel cable, attached to socket and safety chain, same <br />being changed last September, !7eig~ht of load hoisted, 2500 lbs„ <br />distance hoisted, 86G ft, NOT];. The bucket, an reaching the <br />surface, engages an arm, which controls an automatic mrrangement <br />1'or olasing• the door of the shaft, thereby malring it impossible <br />for anything to fall dovrn the shaft, a:Pter bucket has reached <br />surface, The shaft is in eharg~e oi' a trammer, vrho employe <br />the Colorado signal codo, the signals being given either by a <br />bell rope, attached to 8 in. gong, or. by an electric bell line <br />attached to g'ong's, and employing i;he Perine circuit breakers. <br />All signals, ors given both to engineer and top man, there being <br />gangs at collar of shaft and in engine room. A7.1 the level <br />stations are provided with passage-ways around shaft. <br />The method of ore extraction, is that of overhand stoping, <br />using 3, Z 1n., and 2, 2-1~4 in, Sullivan Air llr.ills, 100i~ <br />uir pressure, 3 in. air line in shaft, 1-1~21n. and 2 1n. air <br />lino in levels, and single and double hand drilling. <br />