Laserfiche WebLink
<br />ROADABLE EQUIPMENT: <br />------------------ Total Eqp. Fleet Size Naul Trip Return Trip <br />Machine Description <br />_______________________________ <br />_______________________________ Cost/hr <br />___________________________ <br />___________________________ (no. hauled) <br />____________________ <br />____________________ Cost/hr <br />____________ <br />____________ Cost/hr <br />_____________ <br />_____________ <br />Flatbed Truck 542.05 7 542.05 542.05 <br />NOB/DEMOB SUPPORT EOUI PMENT: <br />Subtotals 542.05 542.05 <br />sheet 2 of 2 <br />--------------------------- Weigh[ Ownership Haul Rig Fleet Size Haul Trip Return Trip DOT Permit <br />Non-Roadable Eqp. Description (tons) Cost/hr CosT/hr (no. hauled) Cost/hr Cost/hr Cost/ea <br />____________________________________________________________________________________________________________________ <br />____________________________________________________________________________________________________________________ <br />Subtotals 50.00 50.00 50.00 <br />Total Eqp. Fleet Size Haul Trip Return Trip <br />Roadable Eqp. Description Cost/hr (no. hauled) Lost/hr Cost/hr <br />_______________________________________________________________________________________________________ <br />Subtotals 50.00 50.00 <br />EQUIPMENT HAUL DISTANCE 8 TIME <br />Nearest major city or town within project area region: Durango <br />Total one way travel distance = 20.0 miles. Average travel speed = 25.00 mph. <br />Job Time - Non Roadable Equip.= 0.50 hours load Roadable Equip.= NIA hours load <br />0.80 hours haul 0.80 hours haul <br />0.50 hours unload N/A hours unload <br />0.80 hours return 0.H0 hours return <br />-----------'-------'- '---'-------'--------- <br />JOB COST Total Mob/Demob Cost = E1, 204.22 <br />NOTE: Non-roadable equi Anent (haul rig required to transport) mob/demob costs based on 2 round trips, each trip <br />consisting of a one-way loaded haul and a one-way empty return. Roadable equi Anent (no haul rig required) <br />costs based on one round trip. Colorado DOT requires special permits for oversize equipment on certain <br />specified road segments within the State. Separate permits are required for each rig on each loaded trip. <br />Additionally, pilot cars (one or two per rig depending on degree of oversize) are also required for oversize <br />equi Anent hauling, and loading/unloading times must be increased substantially for equi Anent which must be <br />partially dismantled for transport and re-assembled at the job site. Costs for lifting equipment and other <br />support equi Anent needed for this work should be included in the mob/demob costs. <br /> <br />