Laserfiche WebLink
• <br />ROADABLE EQUIPMENT: sheet 2 of 2 <br />------------------ Total Eqp. Fleet Size Haul Trip Return Trip <br />Machine Description Cost/hr (no. hauled) Cost/hr Lost/hr <br />------------------------------------------------------------------------------------------------------- <br />------------------------------------------------------------------------------------------------------- <br />Subtotals f0.00 f0.00 <br />NOB/DEMOB SUPPORT EOUI PMENT: --------- --------- <br />--------------------------- Weight Ownership Heul Rig Fleet Size Haul Trip Return Trip DOT Permit <br />Non-Roadable Eqp. Description (tons) Cost/hr <br />____________________________________________________ <br />____________________________________________________ Cost/hr (no. hauled) <br />__________________________ <br />__________________________ Cost/hr <br />____________ <br />____________ Cost/hr Lost/ee <br />__________________________ <br />__________________________ <br />---------------------------------------------------- ----------Subtotals :----- ----f0.00 -- -------f0.00 -------f0.00 <br />Total Eqp. Fleet Size Haul Trip Return Trip <br />Roadable Eqp. Description Cost/hr (no. hauled) Lost/hr Lost/hr <br />_______________________________________________________________________________________________________ <br />Subtotals 50.00 50.00 <br />EQUIPMENT HAUL DISTANCE 8 TINE <br />Nearest major city or town within project area region: Elizabeth <br />Total one way travel distance = 25.0 miles. Average travel speed = 30.00 nph. <br />Job Time - Non Roadable Equip.= 0.50 hours load Roadable Equip.= N/A hours load <br />0.83 hours haul 0.83 hours haul <br />0.50 hours unload N/A hours unload <br />0.83 hours return 0.83 hours return <br />-------'--~__~~-°--- ---------------------- <br />JOB COST Total Mob/Demob Cost = f2, 026.63 <br />_________ _____________ <br />_________ _____________ <br />NOTE: Non-roadable equipment (haul rig required to transport) mob/demob costs based on 2 round trips, each trip <br />consisting of a one-way loaded haul and a one-way eapty return. Roadable equipment (no haul rig required) <br />costs based on one round trip. Colorado DOT requires special permits for oversize equipment on certain <br />specified road segments within the State. Separate permits are required for each rig on each loaded trip. <br />Additionally, pilot cars (one or two per rig depending on degree of oversize) are also required for oversize <br />equipment hauling, and loading/unloading tines must be increased substantially for equipment which must be <br />partially dismantled for transport end re-assembled at the job site. Costs for lifting equipment atd other <br />support equipment needed for this work should be included in the mob/demob costs. <br />