Laserfiche WebLink
506476 06/27/2000 11:45AM Paqa 20 of 28 <br /> Connie Joiner, Clerk 6 Recorder, Teller County, Colorado <br /> application. However, in order to provide some form of drawing for public record, <br /> a Development Plan drawing containing at least schematic information (defined <br /> below) depicting the proposed mining operation must be submitted in conjunction <br /> with the Teller County PUD application. <br /> 6.2 Minimum Drawing Requirements. <br /> 6.2.1. General. A drawing entitled "Development Plan" shall be prepared and <br /> submitted in conjunction with the PUD application. Consistent with the <br /> requirements of Table 6, this drawing shall be an original, drawn in ink on <br /> Mylar sheet(s) 24" x 36" including ��/2" border on 3 sides and 2" border on <br /> left side. <br /> 6.2.2. Standard drawing information. The following standard information shall be <br /> included on the Development Plan drawing (See Table 6 for explanation): <br /> Address; Certifications; Date of Preparation; Legend; Location or vicinity <br /> map; Name of Project; Name and address of owner and applicant; <br /> Owners of adjacent properties; Designer, surveyor, and engineer; Person <br /> preparing the plan; North arrow; Scale; Signature blocks; Zoning. <br /> 6.2.3. Boundaries. Depict boundary of proposed PUD and its relationship to the <br /> CCMOD boundary. PUD boundary need not coincide with OMLR permit <br /> boundary. Any development activity outside the PUD boundary is subject <br /> to other applicable County permitting processes. <br /> 6.2.4. Existing topographical features. Topography within the boundary of the <br /> proposed PUD and surrounding area within 200 feet. <br /> 6.2.5. Existing development. Structures and other existing development <br /> (including but not limited to roadways, other infrastructure, and <br /> easements) within the boundary of the proposed PUD and surrounding <br /> area within 200 feet. <br /> 6.2.6. Proposed modifications to existing topography. May be depicted <br /> schematically with appropriate references to equivalent OMLR <br /> documentation. <br /> 6.2.7. Proposed structures and other development (including but not limited to <br /> roadways, other infrastructure, and easements) within the boundary of the <br /> proposed PUD and surrounding area within 200 feet. <br /> 6.3 Other Drawing Requirements. The minimum drawing requirements are outlined <br /> above. All other applicable requirements of Table 6 must also be met, unless <br /> they can be satisfied by way of reference to equivalent documentation in the <br /> OMLR application. Such references shall be specific and facilitate the location of <br /> information by reviewers. These references shall be grouped together as a <br /> separate section entitled "Drawing Requirements" within the PUD proposal <br /> submitted to Teller County. Include narrative and explanatory notes sufficient to <br /> demonstrate compliance with Development Plan drawing requirements. Such <br /> references shall also be included in the form of notes on the Development Plan <br /> drawing (may require multiple sheets). <br /> CCMOD - Effective May 25, 2000 14 <br />