Laserfiche WebLink
TABLE 4. <br />MATERIAL PROPERTIES <br />CLIENT: Newfields <br />PROJECT: CC&V Newmont Cripple Creek <br />Date Received:2/20/2025 QC'd By: <br />Date Reported:2/27/2025 TRI Job No.: <br />Client Sample ID:L#FND0147920109 L#24BB507 TRI Control No.: <br />Material Description:80mil LLDPE Double Sided Microspike <br />SPECIMENS Proj. <br />1 2 3 4 5 6 7 8 9 10 Avg.Std. Dev.Min Max Specs. <br />METHOD DESCRIPTION <br />ASTM D5994 Thickness (mils)EI#846 <br />Apparatus: Dead-weight dial micrometer with gauge points tapered at an angle of 60 o +/- 2 o to the horizontal with the tip <br />rounded to a radius of 0.8+/-0.1 mm(0.031+/-0.004 in), with a specified force of 0.56+/-0.05 N (2+/-0.2 oz) <br />Loading Time: 5 sec Specimen Size: 4" x 4"68 lowest <br />80 81 84 82 81 81 82 81 82 82 82 1 80 84 76 marv <br />ASTM D1505 Density (grams/ cm.3)EI#810 <br />0.9366 0.9366 0.9366 0.9366 0.0000 0.9366 0.9366 0.939 max. <br />ASTM D6693 Tensile Properties:EI#860 <br />Type IV Test Specimens: Type IV, Width of narrow section:0.25in, Length of narrow section:1.3in, Width Overall:0.75in, <br />Length Overall: 4.5in Rate of Separation: 2"/min <br /> Tensile Strength at Break (lbs/ in.- width) <br />MD 252 267 272 265 262 264 7 252 272 120 min. <br />TD 262 258 279 270 264 267 8 258 279 <br /> Elongation at Break (percent, %)Gauge Length = 2.0 in. <br />MD 532 530 563 542 508 535 20 508 563 250 min. <br />TD 629 607 643 616 616 622 14 607 643 <br />ASTM D4833 Puncture Resistance (lbs)EI#937 <br /> Specimens were tested as directed in Test Method D4833. They were clamped without tension between circular plates of <br /> a ring clamp attachment secured in the tensile machine. Test specimens were extended beyond the outer edges of the <br />clamping plates. <br />162 161 161 161 159 158 159 157 157 156 159 2 156 162 88 min. avg. <br />ASTM D5596 Carbon Black Dispersion (category rating per reference chart PCN: 12-455960-38)EI#817 9 in Cat 1 or 2 <br />1 1 1 1 1 1 1 1 1 1 1 in Cat. 3 <br />ASTM D4218 Carbon Content EI#1035 <br />Apparatus: Muffle Furnace <br />2.26 2.29 2.27 0.02 2.26 2.29 2 - 3 <br />(End of Table 4) (Sheet 1 of 1) <br />10 out of 10 in Category 1 <br />188349 <br />CA250174 <br />By accepting the data and results presented on this report, the Client agrees to limit the liability of TRI Environmental, Inc. from Client and all other parties for claims on issues, due to the use of this data, to the cost for the respective tests presented in <br />this report; and the Client agrees to indemnify and hold harmless TRI Environmental, Inc. from and against all liabilities in excess of the aforementioned limit. <br />LEGENDS: <br />MD - MACHINE DIRECTION <br />TD- TRANSVERSE DIRECTION 1970 S. Santa Cruz Street, Anaheim, CA 92805, www.precisionlabs.net <br /> TRI Environmental, Inc. dba Precision Geosynthetic Laboratories International