Laserfiche WebLink
TABLE 3. <br />MATERIAL PROPERTIES <br />CLIENT: Newfields <br />PROJECT: CC&V Newmont Cripple Creek <br />Date Received:2/20/2025 QC'd By: <br />Date Reported:2/27/2025 TRI Job No.: <br />Client Sample ID:L#FND0147920094 L#24BB507 TRI Control No.: <br />Material Description:80mil LLDPE Double Sided Microspike <br />SPECIMENS Proj. <br />1 2 3 4 5 6 7 8 9 10 Avg.Std. Dev.Min Max Specs. <br />METHOD DESCRIPTION <br />ASTM D5994 Thickness (mils)EI#846 <br />Apparatus: Dead-weight dial micrometer with gauge points tapered at an angle of 60 o +/- 2 o to the horizontal with the tip <br />rounded to a radius of 0.8+/-0.1 mm(0.031+/-0.004 in), with a specified force of 0.56+/-0.05 N (2+/-0.2 oz) <br />Loading Time: 5 sec Specimen Size: 4" x 4"68 lowest <br />83 82 82 81 81 81 82 85 81 83 82 1 81 85 76 marv <br />ASTM D1505 Density (grams/ cm.3)EI#810 <br />0.9366 0.9366 0.9366 0.9366 0.0000 0.9366 0.9366 0.939 max. <br />ASTM D6693 Tensile Properties:EI#860 <br />Type IV Test Specimens: Type IV, Width of narrow section:0.25in, Length of narrow section:1.3in, Width Overall:0.75in, <br />Length Overall: 4.5in Rate of Separation: 2"/min <br /> Tensile Strength at Break (lbs/ in.- width) <br />MD 259 276 261 270 254 264 9 254 276 120 min. <br />TD 265 274 280 289 273 276 9 265 289 <br /> Elongation at Break (percent, %)Gauge Length = 2.0 in. <br />MD 546 544 539 554 535 543 7 535 554 250 min. <br />TD 617 639 643 659 635 639 15 617 659 <br />ASTM D4833 Puncture Resistance (lbs)EI#937 <br /> Specimens were tested as directed in Test Method D4833. They were clamped without tension between circular plates of <br /> a ring clamp attachment secured in the tensile machine. Test specimens were extended beyond the outer edges of the <br />clamping plates. <br />162 159 160 164 160 159 161 160 158 158 160 2 158 164 88 min. avg. <br />ASTM D5596 Carbon Black Dispersion (category rating per reference chart PCN: 12-455960-38)EI#817 9 in Cat 1 or 2 <br />1 1 1 1 1 1 1 1 1 1 1 in Cat. 3 <br />ASTM D4218 Carbon Content EI#1035 <br />Apparatus: Muffle Furnace <br />2.09 2.08 2.09 0.01 2.08 2.09 2 - 3 <br />(End of Table 3) (Sheet 1 of 1) <br />10 out of 10 in Category 1 <br />188348 <br />CA250174 <br />By accepting the data and results presented on this report, the Client agrees to limit the liability of TRI Environmental, Inc. from Client and all other parties for claims on issues, due to the use of this data, to the cost for the respective tests presented in <br />this report; and the Client agrees to indemnify and hold harmless TRI Environmental, Inc. from and against all liabilities in excess of the aforementioned limit. <br />LEGENDS: <br />MD - MACHINE DIRECTION <br />TD- TRANSVERSE DIRECTION 1970 S. Santa Cruz Street, Anaheim, CA 92805, www.precisionlabs.net <br /> TRI Environmental, Inc. dba Precision Geosynthetic Laboratories International