|
MicroSpike®
<br />Liner
<br />HIGH DENSITY
<br />POLYETHYLENE
<br />PRODUCT DATA
<br />Property Test Method Frequency Minimum Average Values
<br />Thickness (nominal ), mil (mm)
<br />ASTM D5994
<br />30 (0.75) 40 (1.0) 60 (1.5) 80 (2.0) 100 (2.5)
<br />Thickness (min avg ), mil (mm)Per Roll 29 (0.71) 38 (0.95) 57 (1.43) 76 (1.9) 95 (2.38)
<br />Thickness (min 8 of 10), mil (mm)27 (0.68) 36 (0.90) 54 (1.35) 72 (1.8) 90 (2.25)
<br />Thickness (lowest individual), mil (mm)26 (0.64) 34 (0.85) 51 (1.28) 68 (1.7) 85 (2.13)
<br />Asperity Height mils, (mm)ASTM D7466 2nd Roll 20 (0.51) 20 (0.51) 20 (0.51) 18 (0.46) 18 (0.46)
<br />Density, g/cc, minimum ASTM D792, Method B 200,000 lb 0.94 0.94 0.94 0.94 0.94
<br />Tensile Properties (both directions)ASTM D6693, Type IV
<br />Strength @ Yield, lb/in width (N/mm)2 in/minute 20,000 lb 66 (11.6) 88 (15.4) 132 (23.1) 176 (30.8) 220 (38.5)
<br />Elongation @ Yield, % (GL=1.3in)12 12 12 12 12
<br />Strength @ Break, lb/in width (N/mm)66 (11.6) 88 (15.4) 132 (23.1) 176 (30.8) 220 (38.5)
<br />Elongation @ Break, % (GL=2.0in)350 350 350 350 350
<br />Tear Resistance, lb,s. (N)ASTM D1004 45,000 lb 23 (102) 30 (133) 45 (200) 60 (267) 72 (320)
<br />Puncture Resistance, lbs. (N)ASTM D4833 45,000 lb 60 (267) 90 (400) 120 (534) 150 (667) 180 (801)
<br />Carbon Black Content, % (range)ASTM D4218 20,000 lb 2-3 2-3 2-3 2-3 2-3
<br />Carbon Black Dispersion (Category)ASTM D5596 45,000 lb Only near spherical agglomerates: 10 views in Cat. 1 or 2
<br />Stress Crack Resistance (SP-NCTL), hrs.ASTM D5397 Appendix 200,000 lb 500 500 500 500 500
<br />Oxidative Induction Time, minutes ASTM D3895, 200°C, 1 atm O2 200,000 lb ≥140 ≥140 ≥140 ≥140 ≥140
<br />SUPPLY INFORMATION (STANDARD ROLL DIMENSIONS)
<br />THICKNESS
<br />mil mm
<br />WIDTH
<br />ft m
<br />LENGTH
<br />ft m
<br />AREA (APPROX.)
<br />ft2 m2
<br />30 0.75 23 7
<br />Double-Sided 980 299 22,540 2,094
<br />Single-Sided 1050 320 24,150 2,244
<br />40 1.0 23 7
<br />Double-Sided 750 229 17,250 1,603
<br />Single-Sided 800 244 18,400 1,709
<br />60 1.5 23 7
<br />Double-Sided 540 165 12,420 1,154
<br />Single-Sided 560 171 12,880 1,197
<br />80 2.0 23 7
<br />Double-Sided 410 125 9,430 876
<br />Single-Sided 425 130 9,775 908
<br />100 2.5 23 7
<br />Double-Sided 335 102 7,705 716
<br />Single-Sided 340 104 7,820 726
<br />AGRU America’s structured
<br />geomembranes are manufac-
<br />tured on state-of-the-art manu-
<br />facturing equipment using the
<br />flat die calender manufac-
<br />turing process, a method that
<br />produces the most consistent
<br />texturing across the roll along
<br />with a more consistent core
<br />thickness than other processes,
<br />such as the blown film extru-
<br />sion process. AGRU uses only
<br />the highest-grade HDPE and
<br />LLDPE resins manufactured in
<br />North America.
<br />GEOSYNTHETICS
<br />Note:
<br />Average roll weight is 3,900 lbs (1,770 kg). All rolls are supplied with two slings. Rolls are wound on a 6“ core. Special length available upon request. Roll length and width have a tolerance of ±1%. The weight
<br />and length values may change due to project specifications (i.e. average or absolute minimum thickness) or shipping requirements (i.e. international containerized shipments). All information, recommendations and
<br />suggestions appearing in this literature concerning the use of our products are based upon tests and data believed to be reliable; however, it is the users responsibility to determine the suitability for their own use of
<br />the products described herein. Since the actual use by others is beyond our control, no guarantee or warranty of any kind, expressed or implied, is made by AGRU America as to the effects of such use or the results
<br />to be obtained, nor does AGRU America assume any liability in connection herewith. Any statement made herein may not be absolutely complete since additional information may be necessary or desirable when
<br />particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations. Nothing herein is to be construed as permission or as a recommendation to infringe any patent.
<br />www.agruamerica.com
<br />AGRU America, Inc.
<br />500 Garrison Road
<br />Georgetown, SC 29440 USA
<br />(800) 373-2478 | Fax: (843) 546-0516
<br />salesmkg@agruamerica.com
<br />Revision Date: March 21, 2018
<br />This information is provided for reference purposes only and is not intended as a waranty or guarantee. AGRU America,
<br />Inc. assumes no liability in connection with the use of this information.
<br />AGRU America’s geomembranes are certified to pass Low Temp. Brittleness via ASTM D746 (-80°C), Dimensional Stability via ASTM D1204 (±2% @ 100°C). Oven
<br />Aging and UV Resistance are tested per GRI GM 13. These product specifications meet or exceed GRI’s GM13.
|