Laserfiche WebLink
Smooth <br />Liner® <br />LINEAR LOW DENSITY <br />POLYETHYLENE <br />PRODUCT DATA <br />Property Test Method Frequency Minimum Average Values <br />Thickness (minimum avg), mil (mm)ASTM D5199 Per Roll 40 (1.0)60 (1.5)80 (2.0)100 (2.5) <br />Thickness (minimum), mil (mm)36 (0.9)54 (1.35)72 (1.8)90 (2.25) <br />Density, g/cc, maximum ASTM D792, Method B 200,000 lb 0.939 0.939 0.939 0.939 <br />Tensile Properties (both directions)ASTM D6693, Type IV <br />Strength @ Break, lb/in width (N/mm)2in/minute 20,000 lb 160 (28)240 (42)320 (56)400 (70) <br />Elongation @ Break, % (GL=2.0in)800 800 800 800 <br />Tear Resistance, lbs (N)ASTM D1004 45,000 lb 25 (111)37 (165)48 (214)62 (276) <br />Puncture Resistance, lbs (N)ASTM D4833 45,000 lb 60 (267)90 (400)120 (534)150 (667) <br />Carbon Black Content, % (range)ASTM D4218 20,000 lb 2 - 3 2 - 3 2 - 3 2 - 3 <br />Carbon Black Dispersion (Category)ASTM D5596 45,000 lb Only near spherical agglomerates: 10 views Cat. 1 or 2 <br />Oxidative Induction Time, minutes ASTM D3895, 200°C, 1 atm O2 200,000 lb ≥140 ≥140 ≥140 ≥140 <br />SUPPLY INFORMATION (STANDARD ROLL DIMENSIONS) <br />THICKNESS <br />mil mm <br />WIDTH <br />ft m <br />LENGTH <br />ft m <br />AREA (APPROX.) <br />ft2 m2 <br />40 1.0 23 7 900 274 20,700 1,923 <br />60 1.5 23 7 600 183 13,800 1,282 <br />80 2.0 23 7 455 139 10,465 972 <br />100 2.5 23 7 365 111 8,395 780 <br />GEOSYNTHETICS <br />Note: <br />Average roll weight is 4,200 lbs (1,905 kg). All rolls are supplied with two slings. Rolls are wound on 6” core. Special length available upon request. Roll length and width have a <br />tolerance of ±1%. The weight values may change due to project specifications (i.e. absolute minimum thickness or special length) or shipping requirments (i.e. international containerized <br />shipments). <br />All information, recommendations and suggestions appearing in this literature concerning the use of our products are based upon tests and data believed to be reliable; however, it is <br />the users responsibility to determine the suitability for their own use of the products described herein. Since the actual use by others is beyond our control, no guarantee or warranty of <br />any kind, expressed or implied, is made by AGRU America as to the effects of such use or the results to be obtained, nor does AGRU America assume any liability in connection herewith. <br />Any statement made herein may not be absolutely complete since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist <br />or because of applicable laws or government regulations. Nothing herein is to be construed as permission or as a recommendation to infringe any patent. <br />www.agruamerica.com <br />AGRU America, Inc. <br />500 Garrison Road <br />Georgetown, SC 29440 USA <br />(800) 373-2478 | Fax: (843) 546-0516 <br />salesmkg@agruamerica.com <br />Revision Date: February 23, 2018 4:55 PM <br />This information is provided for reference purposes only and is not intended as a waranty or guarantee. AGRU America, <br />Inc. assumes no liability in connection with the use of this information. <br />AGRU America’s geomembranes are certified to pass Low Temp. Brittleness via ASTM D746 (-80°C), Dimensional Stability via ASTM D1204 (±2% @ 100°C). Oven <br />Aging and UV Resistance are tested per GRI GM 17. These product specifications meet or exceed GRI’s GM17.