Laserfiche WebLink
- Provision for fire response must be addressed in plan approved by contractor. <br /> - Hot work procedures will be used in ensure welding, cutting and grinding safety. <br /> - These procedures shall include grinding, welding and cutting safety, bottle handling <br /> and storage, training for employees expected to perform welding and cutting, fire <br /> watch procedures, and personnel protection during these operations. <br /> - Compressed gas cylinders must be stored in upright position, secured to prevent <br /> falling, regulators guarded on all sides. <br /> - Welding cylinders not used must be shut off, pressure bled from hoses, and <br /> regulators. <br /> - Two Five-pound fire extinguishers must be provided for all mobile equipment and <br /> at all areas where hot work is being performed. <br /> - Fire extinguishers must be maintained and inspected in accordance with <br /> MSHA/OSHA regulations on/in all mobile equipment. <br /> - CONTRACTOR must have a forty-eight-inch round point shovel and twenty-five <br /> (25) pound Class A fire extinguisher on site at all times. <br /> The above information was reviewed, received, and understood. <br /> Contractor Representative: l / Date: /1-j 12 <br /> Dave's Enterprises, Inc. <br /> PO Box 1142 <br /> Buena Vista, CO 81211 <br /> 970-409-9101 <br />