Laserfiche WebLink
STANDARD WORK SPECIFICATIONS <br /> SAFETY, HEALTH, & ENVIRONMENTAL ACTION PLAN RESPONSE ITEMS <br /> The following is a summary list of items that must be addressed in writing by the <br /> CONTRACTOR. All items that are checked (®) apply to the work to be performed and <br /> must be addressed in a written plan. Each employee is to read and sign the plan as part <br /> of the project orientation prior to starting work on the project. <br /> A. SITE ACCESS <br /> No person may enter the job site without first receiving hazard training from X <br /> CONTRACTOR'S safety representative. <br /> CONTRACTOR employees are required to travel to and from their work areas X <br /> by designated routes. <br /> All CONTRACTOR equipment is subject to a safety inspection before entering X <br /> the job site. <br /> B. PART 48 TRAINING REQUIREMENTS <br /> Each CONTRACTOR employee shall receive orientation training, provided by <br /> the CONTRACTOR, comprised of all aspects of the contract's Safety, Health X <br /> and Environmental Action Plan (SHEAP). <br /> C. SUBSTANCE ABUSE SCREENING <br /> Alcohol and drugs are not allowed on the job site. X <br /> D. PROACTIVE SAFETY <br /> The CONTRACTOR shall designate one person to be the safety X <br /> representative responsible for safety and health at the work site. <br /> The CONTRACTOR shall conduct safety meetings at least weekly. X <br /> All safety meetings shall be documented and include the date, subject matter, X <br /> trainer and all participants signatures. <br /> Daily pre-job safety talks shall be given by the CONTRACTOR . X <br /> Any change in the daily work plan shall be communicated by the X <br /> CONTRACTOR to all affected personnel. <br /> The CONTRACTOR shall conduct daily work area inspections. X <br /> These inspections shall be documented in an approved book. N/A <br /> E. GENERAL SAFETY STANDARDS <br /> Horseplay will not be tolerated. X <br /> Safety glasses, steel toe boots and hard hats are required to be worn at X <br /> all times. This equipment must meet ANSI standards. <br /> Safety glasses and a face shield or goggles are required when performing any <br /> work that generates or could generate flying debris or when this type of work is X <br /> being performed. <br />