Laserfiche WebLink
associated with this permit; (ii) discontinues construction for a period of eighteen months or <br /> more; or (iii) does not complete construction within a reasonable time of the estimated <br /> completion date. Upon a showing of good cause by the permittee, the Division may grant <br /> extensions of the permit. (Reference: Regulation Number 3, Part B, III.F.4.) <br /> 4. Within thirty (30) days after commencement of operation or issuance of this permit, whichever <br /> is later, the AIRS ID (example: 027/0010/001) number must be posted in an easily visible <br /> location for ease of identification. (Reference: Regulation Number 3, Part B, III.G.2.) (State <br /> only enforceable) <br /> EMISSION LIMITATIONS AND RECORDS <br /> 5. Emissions of air pollutants must not exceed the following limitations (as calculated using the <br /> emission factors included in the Notes to Permit Holder section of this permit). (Reference: <br /> Regulation Number 3, Part B, II.A.4) <br /> Annual Emission Limits: <br /> AIRS Tons per Year Emission <br /> Activity point <br /> PM PM10 PM2.5 NOX CO Type <br /> Mining and Hauling 001 7.8 3.1 - - - Fugitive <br /> Operations <br /> Note: In the absence of credible evidence to the contrary, compliance with the fugitive <br /> emission limits is demonstrated by complying with the production limits listed below <br /> and by following the attached particulate emissions control plan. <br /> PROCESS LIMITATIONS AND RECORDS <br /> 6. This source must be limited to the following maximum consumption, processing and/or <br /> operational rates as listed below. Daily and annual records of the actual process rate must be <br /> maintained by the applicant and made available to the Division for inspection upon request. <br /> (Reference: Regulation Number 3, Part B, II.A.4) <br /> Production Limits: <br /> AIRS Production Parameter Annual Limit <br /> Point (tons/year) <br /> Stone extraction 150,000 <br /> 001 _T ANFO/Dynamite use 10 <br /> STATE AND FEDERAL REGULATORY REQUIREMENTS <br /> 7. Visible emissions from conveyors and transfer points must not exceed twenty percent (20%) <br /> opacity during normal operation of the source. During periods of startup, process modification, <br /> or adjustment of control equipment visible emissions must not exceed 30%opacity for more <br /> than six minutes in any sixty consecutive minutes. (Reference: Regulation Number 1, II.A.1. £t <br /> 4.) <br /> OPERATING Et MAINTENANCE REQUIREMENTS <br /> 8. This source is not required to follow a Division-approved operating and maintenance plan. <br /> , ICOLORADO <br /> Mr Pollution Controt Division Page 2 of 7 <br /> Department of Pubtk Health b Enwonment <br />