Laserfiche WebLink
Table 3-3: Fuel Transfer Procedures <br /> Stage Tasks <br /> Prior to loading/ ❑ Visually check all hoses for leaks and wet spots. <br /> unloading ❑ Verify that sufficient volume(ullage)is available in the storage tank or truck. <br /> ❑ Secure the tank vehicle with wheel chocks and interlocks. <br /> ❑ Ensure that the vehicle's parking brakes are set. <br /> ❑ Verify proper alignment of valves and proper functioning of the pumping system. <br /> During loading/ ❑ Driver must stay with the vehicle at all times during loading/unloading activities. <br /> ❑ Periodically inspect all systems,hoses and connections. <br /> unloading ❑ When loading, keep internal and external valves on the receiving tank open along <br /> with the pressure relief valves. <br /> ❑ When making a connection,shut off the vehicle engine.When transferring Class 3 <br /> materials,shut off the vehicle engine unless it is used to operate a pump. <br /> ❑ Monitor the liquid level in the receiving tank to prevent overflow. <br /> ❑ Monitor flow meters to determine rate of flow. <br /> ❑ When topping off the tank, reduce flow rate to prevent overflow. <br /> After loading/ ❑ Make sure the transfer operation is completed. <br /> unloading ❑ Close all tank and loading valves before disconnecting. <br /> ❑ Securely close all vehicle internal,external,and dome cover valves before <br /> disconnecting. <br /> ❑ Make sure the hoses are drained to remove the remaining oil before moving them <br /> away from the connection. Use a drip pan. <br /> ❑ Cap the end of the hose and other connecting devices before moving them to <br /> prevent uncontrolled leakage. <br /> SPCC— YRR 24 Lcwicki&Associates <br /> Date, YEAR <br />