2021-12-07_REVISION - M2012032 (16)

Home Browse Search

OUR4y5/LVER MINES Table 3.3 Hydrocarbon Transfer Procedures Prior to transfer Inspect area and position spill kit for rapid response to any discharge Visually check all hoses for leaks and wet spots Verify that sufficient volume is available in the receiving container Secure the delivery vehicle with wheel chocks, interlocks and parking brake Verify proper alignment of valves Verify proper functioning of the pumping system When making a connection, shut off the vehicle engine Use a drip pan During transfer With Class 3 materials, shut off the vehicle engine unless required to operate a pump Driver must remain with the vehicle at all times during transfer operation Periodically inspect systems, hoses and connections Keep valves and pressure relief valves on the receiving container open Monitor the fill level in the receiving container to prevent overflow Monitor rate of flow When topping off, reduce flow rate to prevent overflow Before disconnecting Verify the transfer operation is completed Verify hoses are drained Close all tank and loading valves Close all vehicle internal, external and dome cover valves Disconnect hoses Cap hoses and other connecting devices before moving them Close all connections to the receiving container Inspect area for any discharge, cleanup immediately Return tools and spill kit to their proper locations Table 3.4 Reagent Transfer Procedures Prior to transfer Inspect area and position spill kit for rapid response to any discharge Park delivery vehicle on concrete apron outside filter building, any spill will flow to sump Visually check for leaks and wet spots Verify that sufficient space is available in the receiving area Secure the delivery vehicle with wheel chocks, interlocks and parking brake Verify proper alignment for forklift to have access Before removing reagents, shut off the delivery vehicle engine Spill Prevention Control and Countermeasure Plan 19 P a g e