2021-06-24_REVISION - M2012032 - Laserfiche WebLink

Home Browse Search

ASME B31.3-2016 (16) Table A326.1 Component Standards (Cont'd) Standard or Specification Designation Nonmetallic Pipes and Tubes (Cont'd) PB Plastic Pipe (SDR-PR) Based on Outside Diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM D3000 PE Plastic Pipe (DR-PR) Based on Controlled Outside Diameter. . . . . . . . . . . . . . . . . . . . . . . . ASTM D3035 PB Plastic Hot- and Cold-Water Distribution Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM D3309 Fiberglass RTR Pressure Pipe [Note (1)]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM D3517 Fiberglass RTR Sewer and Industrial Pressure Pipe [Note (1)]. . . . . . . . . . . . . . . . . . . . . . . . . ASTM D3754 CPVC Plastic Pipe, Sch 40 and 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM F441/F441M CPVC Plastic Pipe (SDR-PR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM F442/F442M Crosslinked Polyethylene/Aluminum/Cross linked Polyethylene (PEX-AL-PEX) Pressure Pipe . . . . . . . . ASTM F1281 Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe . . . . . . . . . . . . . . . . . ASTM F1282 Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems [Notes (2) and (3)]. . . . . . . . . . . ASTM F1412 Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges [Notes (2) and (3)] . . . . . . . . . . . . . . . . . ASTM F1545 PVDF Corrosive Waste Drainage Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM F1673 Pressure-Rated Polypropylene (PP) Piping Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM F2389 Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe. . . . . . . . . . . . . . . . . . . . . . . . . . ASTM F2788/F2788M Reinforced Concrete Pressure Pipe, Steel Cylinder Type, for Water and Other Liquids . . . . . . . . . . . AWWA C300 Prestressed Concrete Pressure Pipe, Steel Cylinder Type,for Water and Other Liquids. . . . . . . . . . . AWWA C301 Reinforced Concrete Pressure Pipe, Noncylinder Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . AWWA C302 PVC Pressure Pipe, 4-inch through 12-inch,for Water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . AWWA C900 Fiberglass Pressure Pipe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AWWA C950 Miscellaneous Contact-Molded RTP Laminates for Corrosion Resistant Equipment. . . . . . . . . . . . . . . . . . . . . . ASTM C582 Threads for Fiberglass RTR Pipe (60 deg stub) [Note (1)] . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM D1694 Solvent Cements for ABS Plastic Pipe and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM D2235 Solvent Cements for PVC Plastic Piping Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM D2564 Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals . . . . . . . . . . . . . . . . . . . . . . ASTM D3139 Fiberglass RTR Pipe Joints Using Flexible Elastomeric Seals [Note (1)] . . . . . . . . . . . . . . . . . . . . ASTM D4161 Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service . . . . . . . . . . . . . ASTM F336 Solvent Cements for CPVC Plastic Pipe and Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM F493 Taper Pipe Threads 60'for Thermoplastic Pipe and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . ASTM F1498 Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/ Crosslinked Polyethylene Composite Pressure Pipe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM F1974 GENERAL NOTE: It is not practical to refer to a specific edition of each standard throughout the Code text. Instead, the approved edition references, along with the names and addresses of the sponsoring organizations, are shown in Appendix E. NOTES: (1) The term fiberglass RTR takes the place of the ASTM designation fiberglass (glass-fiber-reinforced thermosetting resin). (2) This Standard allows the use of unlisted materials; see para. 323.1.2. (3) This Standard contains no pressure—temperature ratings.