2021-04-20_REVISION - M1983033 (20)

Home Browse Search

Walstrum Spur Amendment, Exhibit E— Reclamation Plan April 2021 backfilled will have nearly vertical faces with horizontal benches of varying dimensions. Revegetation in these areas will focus on the horizontal benches. The Operator will place a 1- to 3-foot-thick layer, with an average of 2 feet, of growth medium on the horizontal benched areas. The growth medium will be sloped gently to drain towards the vertical face. See Exhibit F(F-2, cross section A). Slope Reclamafion within Existing Quarry The North Slope Section, as illustrated in Exhibit F(F-2, cross section C), will require backfilling, shaping, and grading to final contours to create the appearance of a natural slope. These slopes will have an overall maximum reclaimed slope between 3H:1V and 2H:1 V. Once mining reaches the final dig line, reclamation is planned to occur concurrently with mining. The benches will be backfilled with overburden to create a subgrade base for a layer of growth medium. Overburden backfill, with growth medium cover, will be placed prior to the recommended seeding period each year. The east side of the Existing Quarry will have an overall maximum slope of 0.6H:1 V and the west and south sides will have an overall maximum slope of 1 H:1V. After mining is completed, the mined slopes will have nearly vertical faces with horizontal benches of varying dimensions. Reclamation in these areas will be confined to the horizontal benches. The Operator will place a 1- to 3-foot-thick layer of growth medium on the horizontal benched areas. The growth medium will be sloped gently to drain towards the vertical face to reduce the amount of runoff and soil erosion from the reclaimed areas. Exhibit F(F-2, cross sections B and D) illustrates typical growth medium placement on Existing Quarry areas other than the North Slope Section. Growth Medium placement in the Spur Amendment and Existing Quarry Where growth medium is required for reclamation, it will be placed with loaders, excavators, and/or dozers. After grading is complete, the surFaces will be compacted and tracked with dozers on contour to minimize erosion and create microclimates for a suitable seed bed. This method will also create shade and snow catching depressions which benefit seed germination and establishment. Alternatively, excavator bucket furrow contouring may be deployed as another method of creating microclimates and to help prevent erosion. Additionally, vegetative scatter, stable boulders, and/or rocky soil will be randomly placed on the growth medium to break sight lines, maximize moisture retention, and further enhance the microclimates. When applicable but not required, the Operator may elect to backfill the entire bench to its final overali slope. This protocol breaks sight lines, creates more forage and develops more escape terrain for wildlife, and is aesthetically pleasing when viewed from the surrounding areas. When this approach is used, the maximum slope of the growth medium will not exceed 1H:1V. 7.2 Seeding, Fertilization, Revegetation, and Topsoiling Information on seeding, fertilization, revegetation, and topsoiling is provided in the Revegetation Plan above. 8.0 RECLAMATION MAP CROSS-REFERENCES The map(s) of the proposed affected land, by all phases of the total scope of the mining operation, shall indicate the following.� 6.4. 6(a) The expected physical appearance of the area of the affected land, correlated to the proposed mining and reclamation timetables. The map must show proposed topography of the area with contour lines of sufficient detail to portray the direction and rate of slope of all reclaimed lands; and SEE EXHIBIT F-1 RECLAMATION MAP 6.4. 6(b) Portrayal of the proposed final land use for each portion of the affected lands. SEE EXHIBIT F-1 RECLAMATION MAP AND EXHIBIT F-2 RECLAMATION DETAILS DTETRA TECH P a g e � I �