2020-12-28_GENERAL DOCUMENTS - M1977300 ‎(23)‎

• Permit No: M1977300
• IBM Index Class Name: General Documents
• Doc Date: 12/28/2020
• Doc Name Note: Part 3 of 3
• Doc Name: North Waste Rock Pile Diversion
• From: Colorado Legacy Land
• To: DRMS
• Email Name: AME
• Media Type: D
• Archive: No

Colorado Legacy Land Former Schwartzwalder Mine
North Waste Rock Pile Diversion Channel
6. All drawings, catalogs or parts thereof,manufacturer's specifications and data,
instructions, and other information specified or necessary for Engineer to
determine that Materials conform with the design concept and comply with intent
of the Contract Documents.
B. Schedule of Submittals:
1. Prepare for Engineer's concurrence,a schedule for submission of all Submittals
specified or necessary for Engineer's approval of the materials proposed for
incorporation in the Work or needed for proper installation, operation, or
maintenance. Schedule submission of all submittals to permit review,
fabrication, and delivery in time so as to not cause a delay in the Work of
Contractor or his Subcontractors or any other contractors as described in the
Contract Documents.
2. In establishing schedule for submittals,allow seven(7)days in Engineer's office
for reviewing original submittals and four(4)days in Engineer's office for
reviewing resubmittals.
3. The schedule shall indicate the anticipated dates of original submission for each
item and Engineer's approval thereof, and shall be based upon at least one
resubmission of each item.
4. Schedule all Submittals required prior to fabrication or manufacture for
submission within 30 days of the Notice to Proceed. Schedule submittals
pertaining to storage, installation, and operation at the Site for Engineer's
approval prior to delivery of the Equipment and Materials.
5. Resubmit submittals the number of times necessary to obtain Engineer's
"Submittal Approved." However, any need for resubmittals in excess of the
number set forth in the accepted schedule, or any other delay in obtaining
approval of submittals,will not be grounds for extension of the Contract times,
provided Engineer completes his reviews within the times specified.
C. Transmittal of Submittals:
1. All submittals(Shop Drawings and product data)for Materials furnished by
Contractor, Subcontractors,manufacturers, and Suppliers shall be submitted to
Engineer by Contractor.
2. After checking and verifying all field measurements,transmit all submittals to
Engineer for approval using the Submittal Transmittal supplied in the Project
Manual.
3. Mark each submittal by Project name, Contract title and number, and applicable
Specification section and article number. Include in the submittal an itemized list
with identification number of submittal contents. Unidentifiable submittals will
be returned for proper identification.
4. Check and include Contractor's approval for submittals of Subcontractors,
Suppliers, and manufacturers prior to transmitting them to Engineer.
Section 013300- Submittals Page 3