Laserfiche WebLink
Tom Bird C1981035 TR29 <br />Page 3 of 7 <br />April 8, 2020 <br />associated tables should be incorporated into existing Appendix 11(1). GCC requests that the <br />Division disregard Appendix 11(2) as provided in the initial TR -29 submittal. Revised <br />Appendix 11(1) was provided with the May 8, 20120 submittal and separated into sub - <br />appendices for added clarity. The Drainage Basin ID Table has been revised to properly <br />describe the facility areas and curve numbers. <br />8) Related to the Ditch Capacities table, please address the following questions and comments. <br />a) ID -7 has a bottom width but a triangular shape. <br />GCC Energy has corrected the bottom width of ditch ID -7 to zero on the revised Ditch <br />Capacities Table with the 51812020 submittal. <br />b) It is unclear if ID -7 flows to ID -8 (per Structure Networking), Basin E1 (per "Station" <br />column in Ditch Capacities table), or Culvert C21 (per Map King II -007A)? Please check <br />and edit as necessary. <br />GCC Energy's 0510812020response; The SECDAD Structure Networking printout has <br />been modified to clarify the various flow elements and to better correlate with the <br />associated tables. ID -7 flows into ID -8, ID -7 collects the runoff from Basin EI & ID -8 <br />collects the runoff from Basin D. Map King II -007A culvert and ditch ID labels have also <br />been revised to better reflect the Structure Networking printout. <br />c) ID -8 has a bottom width but a triangular shape. <br />GCC Energy's 05108/2020 response; The bottom width of ditch ID -8 has been changed to <br />zero. <br />d) Where is ID -9 on Map King II -007A? Please revise text and/or map, as necessary. <br />GCC Energy's 0510812020 response: Ditch ID -9 has been added to Map King II-OO7A. <br />e) For ID -9, the depth in the SEDCAD printout (0.28') does not match the required depth in <br />the Ditch Capacities table (0.82'). One of these appears to be a typo. <br />GCC Energy's 0510812020 response; The depth in the Ditch Capacities table (0.82 ) is <br />correct. The SEDCAD printout has been modified to match the table. <br />