Laserfiche WebLink
emeCONTINENTAL MATERIALS CORPORATION <br /> Sampling should occur at the same time each year to maximize comparability between data sets <br /> (We would recommend within plus or minus two weeks of the same dates.) <br /> Photographic Documentation: <br /> "A color photograph oriented along the transect from the origin will be taken at each site. Color <br /> copies of these photographs will be attached to each annual report." CMC will maintain these <br /> reports at the Pikeview Quarry for inspection by the DRMS and the USFS until the permit is <br /> terminated. <br /> Noxious Weed Control Plan <br /> Weed control shall be employed for all prohibited noxious week species. Weed control shall also <br /> be utilized to thwart weedy species threatening the success of reclamation species or when <br /> weeds threaten to spread outside the permit boundary. Continental Materials Corp. will comply <br /> with the State of Colorado and El Paso County Noxious Weed Control regulations. <br /> Noxious Weed Monitoring Schedule: <br /> Noxious weed monitoring will occur in the months of April/May and again in the months of <br /> August/September. Noxious weed locations will be GPS located during the monitoring periods <br /> and again as part of the commercial treatment program. We will maintain a log and map as to <br /> noxious weed locations and dates and types of treatments. This record will be maintained on- <br /> site at the Company Office at the Pikeview Quarry for inspection by the DRMS and USFS until <br /> the site is released from reclamation liability and the permit terminated. <br /> Continental Materials Corp. will utilize the following mechanical and chemical methods to control <br /> noxious weeds: <br /> Field Mowing: <br /> Prior to noxious weeds reaching full maturity (producing flowers/going to seed), the weeds shall <br /> be mechanically mowed to a height of 4" to 6" where such activity will not pose a hazard to <br /> equipment or equipment operators. This should be performed twice during the growing season <br /> in late spring and late summer. Additional mowing will be performed as necessary. <br /> Chemical Control: <br /> One initial application of an appropriate selective herbicide shall be applied, per manufactures <br /> recommendations, or by a certified applicator for control of noxious weeds. Application shall be <br /> done during the growth stage and when temperatures and other conditions are appropriate to <br /> achieve the most effective control. Follow-up applications will be done as needed. In areas where <br /> Pikeview Quarry Amendment 4 <br /> E-9 <br />