Laserfiche WebLink
ACUREN <br /> Item Status comments <br /> 8.0 Venting <br /> 8.1 Vents free of obstructions? ❑ X Yes n No* <br /> 8.2 Emergency vent operable? <br /> Lift as required? uYes u No' u X N!A INLET PIPE ACTS AS EMERGENCY VENT, <br /> 9.0 Insulated Tanks <br /> 9.1 Insulation missing? ❑Yes* ❑ No X N/A <br /> 9.2 Are there noticeable areas of <br /> moisture on the insulation? uYes* n No X NIA <br /> 9,3 Mold on insulation? uYes' a No X N/A <br /> 9.4 Insulation exhibiting damage? ❑Yes* ❑ No X N/A <br /> 9.5 Is the insulation sufficiently <br /> protected from water intrusion? -Yes ❑ No*X N/A <br /> 10.0 Level and Overfill Prevention Instrumentation of Sho -Fabricated Tanks <br /> 10.1 Has the tank liquid level <br /> sensing device been tested to <br /> ensure proper operation? ❑ X Yes a No* NIA <br /> 10.2 Does the tank liquid level <br /> sensing device operate as <br /> required? n X Yes ❑ No* NIA <br /> 10.3 Are overfill prevention <br /> devices in proper working <br /> condition? Yes a No' u X NIA <br /> 11.0 Electrical Equipment <br /> 11.0 Are tank grounding lines in <br /> good condition? n X Yes n No* ❑ NIA <br /> 11.2 Is electrical wiring for control <br /> boxes/lights in good condition? a Yes a No' u X N/A <br /> RECOMMENDATIONS <br /> 1. USE MORE CARE AT FILLING LOCATION. <br /> 2. REPAINTING THE TANK SHOULD REDUCElPREVENT CORROSION. <br /> 3. PERFORM PERIODIC INSPECTIONS AS OUTLINED IN STI-SPOO1. <br /> 4. WEEDS EXIST INSIDE OF CONTAINMENT AREA. REMOVING WEEDS SHOULD REDUCE FIRE HAZARDS. <br />