Laserfiche WebLink
C-18 <br /> Oversize(Reject) Stockpile <br /> The oversize stockpile will be situated proximal to the screening tower, which is to be located at the west <br /> end of the drying plant. Oversize material (i.e., that greater than #40) from the screening process will be <br /> stockpiled via a radial stacking conveyor unit. It is anticipated that the oversize stockpile will,at maximum <br /> capacity, encompass an approximately 55-ft. diameter footprint. <br /> Oversize material will be collected for the duration of the operational period, and it is anticipated that the <br /> material will remain in-place until final site closure, at which time it will be utilized in site grading and/or <br /> backfill activities. <br /> Product Storage Bins <br /> Two separate product storage bins (refer again to Figure C-7: Dry Plant and Loadout Facilities)will be <br /> situated proximal to the southwest corner of the Permit Area. The bins will be connected to the screening <br /> plant via twin 36-inch by 150-ft. telescoping stacking conveyor units which will convey dry product to the <br /> 12,000 tons (total capacity)twin storage bins. <br /> The bins will be constructed atop timber or composite matting. Each storage bin will accommodate 6,000 <br /> tons of final product,and occupy an area approximately 85-ft.by 165-ft. Exterior walls will be constructed <br /> of stacked precast concrete bin blocks to a nominal height of 6-ft. Each bin will be fully enclosed, with a <br /> steel-framed, canvas-covered roof(or equivalent). <br /> Loadout and Scale Facilities <br /> The product storage bins are, in turn, connected to the loadout facility via twin conveyors which will be <br /> utilized for direct loading(via front-end loader)of third-party owned, over-the-road(OTR) trucks. <br /> Keenesburg Project—Limited Impact 110 Application_May 24,2019 <br />