Laserfiche WebLink
NOTES: <br /> 1) Test holes were drilled on 08/07/2018 with 4-inch diameter continuous flight augers. <br /> 2) Locations of the test holes were surveyed by a representative of the client and shown on the site plan <br /> provided. <br /> 3) Elevations of the test holes were surveyed by a representative of the client and the logs of the test holes are <br /> hung to elevation. <br /> 4) The test hole locations and elevations should be considered accurate only to the degree implied by the <br /> method used. <br /> 5) The lines between materials shown on the test hole logs represent the approximate boundaries between <br /> material types and the transitions may be gradual. <br /> 6) Groundwater level readings shown on the logs were made at the time and under the conditions indicated. <br /> Fluctuations in the water level may occur with time. <br /> 7) The material descriptions on this legend are for general classification purposes only. See the full text of this <br /> report for descriptions of the site materials and related information. <br /> 8) All test holes were immediately backfilled upon completion of drilling, unless otherwise specified in this <br /> report. <br /> GROUND <br /> LEGEND AND NOTES <br /> JOB NO.: 18-3046 FIGURE: 12 <br /> CADFILE NAME: 3046LEG02.DWG <br />