Laserfiche WebLink
<br /> <br />1313 Sherman Street, Room 215, Denver, CO 80203 P 303.866.3567 F 303.832.8106 http://mining.state.co.us <br />John W. Hickenlooper, Governor | Robert W. Randall, Executive Director | Virginia Brannon, Director <br />1313 Sherman Street, Room 215 <br />Denver, CO 80203 <br /> <br /> <br />December 11, 2018 <br /> <br />Tom Bird <br />GCC Energy, LLC <br />6473 County Road 120 <br />Hesperus, CO 81326-9633 <br /> <br /> <br />Re: King Coal Mine (Permit No. C-1981-035) <br /> Technical Revision No. 27 (TR-27) <br /> Reconfigure Parts of the Existing, Permitted Refuse Pile <br /> <br /> <br />Dear Mr. Bird: <br /> <br />We have received your application for a technical revision to your permit to conduct coal mining in <br />Colorado. Our initial review indicates that all preliminary items required by Rule 2.08.4(5) have <br />not been submitted. Thus, your application is incomplete for the purposes of filing as of December <br />11, 2018. <br /> <br />The following items are required before the Division can begin to review the revision application: <br /> <br />1. The cover letter states that Map King I-007 is enclosed in the application. A paper version of this <br />map was not included in the application. Please submit a paper version of this map for review. <br /> <br />2. The currently approved map in the permit with the name “Map King I-007A” contains the as- <br />built plans for the east and west sediment ponds. The map submitted with the TR-27 application <br />with the same name shows the haul road details. Please rename the haul road map to avoid <br />confusion. <br /> <br />3. Map King I-007A submitted in the TR-27 application is on an 8”x11” sheet of paper. The font <br />on the map is too small to read and therefore illegible. Please submit a larger version of this map <br />that meets the standards of Rule 2.10.1. <br /> <br />4. The SedCad modeling data was that was used to design the ditches in TR-27 was not submitted in <br />the application. This data is needed for the review process to verify appropriate ditch and culvert <br />sizing (Rules 2.05.3(4)(a) and (d) and 4.05.3). Please submit the SedCad data that was used to <br />design the ditches and culverts associated with this revision.