2018-01-11_PERMIT FILE - C1996084 ‎(2)‎

• Permit No: C1996084
• IBM Index Class Name: Permit File
• Doc Date: 1/11/2018
• Section_Exhibit Name: Exhibit 23 Bond Calculations
• Media Type: D
• Archive: No

TrucWL.oader Worksheet Cont'd Task # 004
Payload Capacity: 48.05 LCY
TruckBed (volume) Basis:
Struck Volume:
35.00
LCY
Heaped Volume:
46.50
LCY
Average Volume:
40.75
LCY
Adjusted Volume:
46.50
LCY
Final Truck Volume Based on Numb er of Loader Passes:
Loading Tool Capacity
Rated Capacity:
Bucket Fill Factor:
Adjusted Capacity:
11.250
39.38
Bucket Size Class: NA
Page 2 of3
LCY
Job Condition Corrections: Site Altitude (ft.): 7100 feet
Loading Tool Cycle Time: Numberof Loading ToolPasses Required to Fill
Excavators and Front Shovels: Truck:
Machine Cycle Time vs. Job Condition Rating: NA
Selected Value within this Basic Rating: NA
Track Lo aders —Material Description:
Cycle Time Elements (min.):
Load: NA Maneuver: NA Dump:
0.100
4 passes
Wheel and Track Loaders -Unadjusted Basic Loader Cycle Time (load, dump, 0.600 minutes
maneuver):
Cycle Time Factors
0.700
Factor min.)
Source
Material:
Mixed material 0.02
0.020
Cat HB
Stockpile:
Conveyor ordozerpiled 10 ft. high orless
0.01
0.010
(Cat HB)
Truck Ownership:
Common ownership oftrucksand loaders -
0.04
-0.040
(Cat HB)
Operation:
Constant operation -0.04
-0.040
(Cat HB)
Dump Target:
Nominal target 0.00
0.000
Cat HB
Net Cycle "Lune Adjustment: -0.050 minutes
Adjusted Loader Cycle Time: 0.550 minutes
Net Load Time per Truck: 1.750 minutes
Truck Cvcle Time:
Truck Exchange Time: 0.70 Minutes
TruckLoadTime: 1.750 Minutes
Truck Maneuver and Dump 1.10 Minutes
Time:
Adjustedfor site altitude:
0.700
Minutes
Adjustedforsitealtitude:
1.750
Minutes
Adjustedforsitealtitude:
1.100
Minutes
CIRCES Cost Estimating Solware