Laserfiche WebLink
➢ Application of soil stabilizers and soil amendment products <br /> 3.2 Locations of Pollutants <br /> A map showing the areas where mining activities occur and the locations of all potential pollutant <br /> sources, is provided in Exhibit 2. This map is used by the SWMP administrator to locate <br /> inspection sites and to determine the effectiveness of the BMPs described below. <br /> 3.3 Best Management Practices (BMPs) <br /> The activities and materials listed above have been identified as having a reasonable potential for <br /> exposure and subsequent contamination of storm water runoff. These sources of possible <br /> contamination are managed through site specific structural and procedural BMPs which have <br /> been implemented to address these potential storm water pollutants. Each of these activities, <br /> including the associated potential storm water pollutant(s) of concern and associated BMPs, is <br /> described in greater detail in the following table. <br /> 6 <br />