Laserfiche WebLink
2.05.3 <br />components, motors, gear boxes, mine equipment, mine equipment <br />components, surface equipment, surface equipment components, rock dust, <br />gravel, masonry block, masonry supplies, sealant, foam and tools. Material <br />storage areas are shown on Maps 15-1, 15-2, 15-3 and 15-4. There is one <br />material storage area located at the head of Stevens Draw that is not shown <br />on the maps. <br />Shop <br />A pre-engineered metal building located on the D -Seam portal level to store <br />supplies and to repair and fabricate equipment. The building is <br />approximately 100 feet by 50 feet with a 24 foot eave height. <br />Warehouse <br />A pre-engineered metal building located on the D -Seam portal level <br />immediately adjacent to and south of the shop. This building is <br />approximately 50 feet by 60 feet with a 24 foot eave height. <br />Washbav <br />Pre-engineered metal buildings located on the D -Seam and B -Seam portal <br />levels. The buildings are approximately 50 feet by 25 feet with 24 foot eave <br />heights. <br />Covered Storage <br />Six three sided pre-engineered metal buildings. One located on the D -Seam <br />portal level between the washbay and the fueling station and two are located <br />near the main topsoil stockpile. Two are located on the B -Bench. The D - <br />Bench portal level building is approximately 30 feet by 80 feet with a 20 foot <br />eave height. The stockpile level buildings are approximately 30 feet by 110 <br />feet and 27 feet by 55 feet with 15 foot eave heights. One B -Bench building <br />is approximately 40 feet by 15 feet with a 15 foot eave height. The other B - <br />Bench building is approximately 50 feet by 25 feet with a 20 foot eave height. <br />One is located north of the Fire Mountain Canal, and west of the overhead <br />conveyor, and is approximately 100 feet by 20 feet with a 20 foot eve height. <br />Quonset Hut <br />One 12.5 feet high by 60 feet long (25'X60') Quonset but is located on the Hubbard <br />Creek Shaft pad. The but houses a nitrogen generator. The nitrogen generator <br />consists of two 7 feet by 12 feet by 7 feet high electrical powered air compressors <br />and one 8 feet by 16 feet by 7 feet high nitrogen generator. The Quonset but is <br />TR -91 2.05-15- 10/14 <br />