Laserfiche WebLink
Newmont-Cripple Creek&Victor Gold Mine ■ <br /> Technical Specification No.02776-1.DOCX ■ <br /> Squaw Gulch VLF <br /> Project No.475.0106.006 <br /> June 15,2016 <br /> SECTION 02776.1 GEOGRID <br /> 1. PART 1: GENERAL <br /> 1.1. Summary <br /> This SPECIFICATION describes requirements for the manufacture, fabrication (if needed), <br /> supply, and installation of geogrid over potential mine workings, as shown on the DRAWINGS; <br /> and construction quality control monitoring and testing. All procedures, operations, and <br /> methods shall be in strict compliance with the SPECIFICATIONS, Construction Quality Assurance <br /> Plan, and the DRAWINGS. <br /> 1.2. References <br /> A. ASTM D1248-Specification for Polyethylene Plastics Molding and Extrusion Materials. <br /> B. ASTM D4218 - Test Method for Carbon Black Content in Polyethylene Compounds by <br /> the Muffle- Furnace Technique. <br /> C. ASTM D4355 - Test Method for Deterioration of Geotextile by Exposure to Light, <br /> Moisture, and Heat in a Xenon Arc Type Apparatus. <br /> D. ASTM D5262 - Test Method for Evaluating Creep and Creep Rupture Behavior of <br /> Geosynthetics. <br /> E. ASTM D5732 - Test Method for Stiffness of Non-Woven Fabrics Using the Cantilever <br /> Test. <br /> F. ASTM D6637-Test Method for Determining Tensile Properties of Geogrids by the Single <br /> or Multi- Rib Tensile Method. <br /> G. ASTM D7737-Standard Test Method of Individual Geogrid Junction Strength <br /> H. ASTM D7748- Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles, and <br /> Related Products <br /> I. GRI -Test Method GG2 - Geogrid Junction Strength. <br /> J. GRI -Test Method GG4- Determination of the Long-Term Design Strengths of Geogrids. <br /> K. EPA 9090-Test Method for Determining the Chemical Waste Compatibility of Synthetic <br /> Liners. <br /> 1.3. Submittals <br /> CONTRACTOR shall provide the following information relating to the geogrid MANUFACTURER <br /> and INSTALLER prior to commencement of the WORK: <br /> A. Information from the MANUFACTURER including company name, address,telephone <br /> number, and the names of the company president and quality control manager. <br /> Page 1 <br />