2016-07-11_REVISION - M1980244

• Permit No: M1980244
• IBM Index Class Name: Revision
• Doc Date: 7/11/2016
• Doc Name: TR78 Corrected
• From: Newmont
• To: DRMS
• Type & Sequence: TR78
• Email Name: TC1
• Media Type: D
• Archive: No

Newmont-Cripple Creek&Victor Gold Mine
Technical Specification No.02776-O.DOCX ■
Squaw Gulch VLF
Project No.475.0106.006
June 15,2016
2. The MANUFACTURER shall provide sufficient production and qualified personnel to
meet the demands of the work and shall have an internal quality control program for
its product.
3. The MANUFACTURER shall permit MANAGER, DESIGN ENGINEER, and/or
CERTIFYING ENGINEER or their authorized representative to visit the manufacturing
plant.
B. Geomembrane Installation Qualifications (INSTALLER)
1. INSTALLER shall be the MANUFACTURER or an approved CONTRACTOR trained and
licensed to install the MANUFACTURER's geomembrane. Installation shall be
performed under the constant direction of single Installation Superintendent who
shall remain on-site and be responsible, throughout the geomembrane installation,
for geomembrane layout, seaming, patching, testing, repairs, and all other activities
by INSTALLER.
2. The Installation Superintendent shall have installed or supervised, at a minimum
three installation projects that entailed the installation of at least a total of
1,000,000 square feet of the type of geomembrane that is being installed at the
Squaw Gulch VLF Project.
3. Actual seaming shall be performed under the direction of a Master Seamer (who
may also be the Installation Superintendent) who has seamed a minimum of
1,000,000 square feet of the type of geomembrane that is being installed at the
Squaw Gulch VLF Project, using the same type of seaming apparatus specified for the
Work.
4. The Installation Superintendent and/or Master Seamer shall be present whenever
seaming is performed.
C. Quality Assurance Program
1. All WORK shall be constructed, monitored, and tested in compliance with the
requirements of the Construction Quality Assurance Plan (Section 01400.2).
CONTRACTOR and MANUFACTURER shall participate in and comply with all items in
these SPECIFICATIONS and requirements of the CQA plan.
2. CONTRACTOR shall ensure that each geomembrane MANUFACTURER that supplies
materials to this project has an internal product quality control program that meets
SPECIFICATIONS.
3. During manufacturing of the geomembrane, samples of geomembrane shall be
removed for laboratory testing to ensure compliance with this SPECIFICATION.
Conformance sampling and testing will be performed in accordance with the
Construction Quality Assurance Plan.
4. CONTRACTOR shall assure that the geomembrane is delivered to the site at least 10
calendar days prior to installation. CONTRACTOR will provide required Quality
Control information 10 calendar days prior to geosynthetics being delivered to the
Page 4