2016-01-18_REPORT - M1977493

• Permit No: M1977493
• IBM Index Class Name: REPORT
• Doc Date: 1/18/2016
• Doc Name: Asbestos Disposal Shaft Closure Report
• From: Climax Molybdenum
• To: DRMS
• Email Name: ECS
• Media Type: D
• Archive: No

SPECIFICATION NUMBER:
; , Climax Molybdenum CONCRETE CONSTRUCTION 03 30 00 SPE
A Freepon-McMoRan Company TECHNICAL SPECIFICATION PROJECT NAME:
CAVR Shaft Closure Project
A. Independent Materials Testing Subcontractor
1. Contractor shall employ the services of an independent, third party
subcontractor to perform quality control testing of concrete as specified
herein. Owner or Engineer may perform periodic quality assurance testing.
B. Testing and Inspection
1. The Contractor's independent, third party subcontractor shall perform the
testing as described below:
a. Slump Testing. Measure concrete slump when compressive strength
specimens are cast. Measurement shall be in accordance with ASTM
C143. Report slump verbally to the Contractor at the time of testing
and in writing along with the compressive strength data.
b. Air Content Testing. Measure air content when compressive strength
specimens are cast. Specified air content shall be attained at point of
placement into the forms. Measurement shall be in accordance with
ASTM C231. Report air content verbally to the Contractor at the time
of testing and in writing along with the compressive strength data.
c. Strength Specimens. Cast test cylinders for compressive strength tests
for each mix design. One set of cylinders shall be made for each 50
cubic yards of concrete, minimum of one set per day. The number of
test cylinders need not exceed 3 sets per day for each mix. A set of
strength test specimens shall consist of four cylinders,one to be tested
at 7 days and two at 28 days. If either of the 28 day breaks does not
meet the specified strength, the fourth cylinder shall be tested at 56
days, otherwise it will be discarded. Test specimens shall be molded
and cured in accordance with ASTM C31 and tested in accordance
with ASTM C39. Results of strength tests shall be reported
immediately to the Owner and/or Engineer.
PART 2 - PRODUCTS
2.01 CODES AND STANDARDS AND GUIDES
The latest issues of the following Specifications, Codes, Standards and Guides, including
revisions and supplements in effect as of May 18, 2015, form a part of this specification in
their entirety, except as modified by this Specification.
A. American Society for Testing Materials (ASTM)
A 36 Standard Specification for Carbon Structural Steel.
114-910345 CONCRETE CONSTRUCTION
Climax CAVR Shaft Closure Project 03 30 00 SPE-4