Laserfiche WebLink
MATERIAL SAFETY DATA SHEET <br />FLOTTEC PAX COLLECTOR <br />NOVEMBER 1, 2009 <br />REVISION No. 03 <br />SUPERSEDES: 02/19/2007 <br />8. EXPOSURE CONTROLS AND PERSONAL PROTECTION I <br />ENGINEERING Where this material is not used in a dosed system, good enclosure and local exhaust ventilation should be provided <br />MEASURES to control exposure. <br />PERSONAL PROTECTIVE EQUIPMENT <br />RESPIRATORY Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures <br />PROTECTION: exceed the established exposure limit, use respiratory protection recommended for the material and level of <br />exposure. <br />EYE Wear eye /face protection such as chemical splash proof goggles or face shield. Eyewash equipment and safety <br />PROTECTION: shower should be provided in areas of potential exposure. <br />SKIN Avoid skin contact. Wear impermeable gloves and suitable protective clothing. <br />PROTECTION: <br />ADDITIONAL Food, beverage and tobacco products should not be carried, stored or consumed where this material is used. <br />ADVICE• Before eating, drinking, or smoking, wash face and hands with soap and water. <br />19. PHYSICAL AND CHEMICAL PROPERTIES <br />COLOR: <br />Yellow -green <br />APPEARANCE: <br />Pellets, Flakes, or powder <br />ODOR: <br />Disagreeable <br />BOILING POINT: <br />Not applicable <br />MELTING POINT: <br />491 - 536 °F; 255 - 280 °C <br />VAPOR PRESSURE: <br />Not applicable <br />SPECIFIC GRAVITY: <br />Not available <br />VAPOR DENSITY: <br />Not applicable <br />VOLATILE (BY WT.): <br />- 1.5 <br />pH: <br />Not applicable <br />SATURATION IN AIR (% by Vol): <br />Not applicable <br />EVAPORATION RATE: <br />Not applicable <br />SOLUBILITY IN WATER: <br />35g/100g at 20 °C <br />VOLATILE ORGANIC CONTENT: <br />Not available <br />FLASH POINT: <br />Not applicable <br />FLAMMABLE LIMITS (% BY VOL.): <br />Not applicable <br />AUTO IGNITION TEMPERATURE: <br />>248 °F; 120 °C (value for carbon disulfide) <br />DECOMPOSITION TEMPERATURE: <br />>267.8 - 536 °F; 131 - 280°C <br />PARTIAL COEFFICIENT (n- octanol /water): Not available <br />ODOR THRESHOLD: <br />See Section 2 for exposure limits <br />10. STABILITY AND REACTIVITY <br />STABILITY: <br />Stable <br />CONDITIONS TO AVOID: <br />Containers filled with this product should be kept dosed when not in use. Keep container in a <br />cool, well - ventilated area. Exposure of the solid xanthate to heat or moisture and heating or <br />aging of xanthate solutions. Avoid prolonged exposure to heat; avoid strong acids, alkalies and <br />oxidizing agents. Keep water and moist air out of container. <br />POLYMERIZATION: <br />Will not occur <br />CONDITIONS TO AVOID: <br />None known <br />MATERIALS TO AVOID: <br />Strong oxidizing agents, acidic material. High temperatures <br />HAZARDOUS DECOMPOSITION <br />PRODUCTS: <br />Carbon disulfide, carbon monoxide, carbon dioxide, oxides of sulfur (includes sulfur di and tri <br />oxides), hydrogen sulfide <br />Page 3 of 6 <br />