2014-09-29_PERMIT FILE - M2012032

• Permit No: M2012032
• IBM Index Class Name: PERMIT FILE
• Doc Date: 9/29/2014
• Doc Name: MSDS Pages for material containment plan
• From: Star Mine Operations LLC
• To: DRMS
• Email Name: RCO
• Media Type: D
• Archive: No

MATERIAL SAFETY DATA SHEET REVISION No. 03
FLOTTEC PAX COLLECTOR SUPERSEDES: 02/19/2007
NOVEMBER 1, 2009 H-a7zF
maxtm/rinR the valos Motatlon CRem /cu /s Tschnotaary
14. FIRST AID MEASURES
INGESTION: If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give
anything by mouth to an unconscious person.
SKIN CONTACT: Remove contaminated clothing and shoes without delay. Wash immediately with plenty of water. Do not reuse
contaminated clothing without laundering. Get medical attention if pain or irritation persists after washing or if
signs and symptoms of overexposure appear.
EYE CONTACT: Rinse immediately with plenty of water for at least 15 minutes. Obtain medical attention immediately.
INHALATION: Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
EXTINGUISHING MEDIA AND FIRE FIGHTING INSTRUCTIONS
Extinguishing
Use carbon dioxide, dry chemical or large quantities of water.
Media:
Protective
Firefighters, and others exposed, wear self- contained breathing apparatus. Wear full firefighting protective
Equipment'
clothing. See MSDS Section 8 (Exposure Controls /Personal Protection).
Special
Solid xanthates are stable when kept cool and dry. Exposure to heat and moisture can cause decomposition to
Hazards'
'
flammable and explosive vapor of carbon disulfide. Since xanthates decompose in solution, even at room
solutions, (2) draining mobile tanks, (3) cleaning mobile tanks, and (4) performing maintenance work on storage
temperature, fire and explosion hazards can develop with aging.
tanks and pipelines leading to and from tanks. Use non - sparking tools and do not smoke when opening drums of
6. ACCIDENTAL RELEASE MEASURES
PERSONAL
Where exposure level is not known, wear approved, positive pressure, self - contained respirator. Where exposure
PRECAUTIONS:
level is known, wear approved respirator suitable for level of exposure. Refer to Section 8 (Exposure
Controls /Personal Protection) for appropriate personal protective equipment.
METHODS FOR
Sweep up into containers for disposal. Flush spill area with water.
CLEAN UP:
ENVIRONMENTAL
Dispose of in accordance with EPA rules and regulations.
PRECAUTIONS:
HANDLING
Precautionary
Avoid excessive heat or moisture. Avoid contact with eyes, skin and clothing. Avoid breathing dust. Keep
Measures :
container closed. Wash thoroughly after handling. Use non - sparking tools and do not smoke when opening drum.
Use with adequate ventilation. Contains finely divided material. Dust suspended in air may ignite with static
discharge, sparks or flame. Equipment, including venting systems, should be grounded. Provide adequate
ventilation in areas of use to remove dust. Wash contaminated clothing before reuse.
Special Handling
Minimize dust. Special precautions against fire and explosion must be observed in (1) pumping xanthate
Statements :
solutions, (2) draining mobile tanks, (3) cleaning mobile tanks, and (4) performing maintenance work on storage
tanks and pipelines leading to and from tanks. Use non - sparking tools and do not smoke when opening drums of
xanthate. DUST EXPLOSION HAZARD CLASS - 2 Handling of material should be in accordance with standards for
venting of deflagration (e.g. NFPA -68). If handled with flammable or combustible materials the explosion hazard
may increase
STORAGE Heating or overexposure to moisture of solid xanthates or heating or aging of xanthate solutions causes some
decomposition to poisonous and flammable carbon disulfide. Storage tanks should have certain design features
for maximum safety, and the vapor space should be free of sources of ignition.
Storage Store at <32.2 - 10 °C 90 - 50 °F
Temperature: Reason: Safety
Page 2 of 6