2014-08-04_REVISION - M1981185 ‎(3)‎

• Permit No: M1981185
• IBM Index Class Name: Revision
• Doc Date: 8/4/2014
• Doc Name: TR2 As Builts- Part 2
• From: WMC
• To: DRMS
• Type & Sequence: TR2
• Email Name: DMC
• Media Type: D
• Archive: No

LABORATORY COMPACTION CHARACTERISTICS OF SOIL REPORT Irerracon
Report Number: 69121002.0008
Service Date: 02/13/12 #4 A CR 3499
Report Date: 02/17/12 Flora Vista,NM 87415
505-334-2900
Client Project
Wildcat Mining Corporation Wildcat Mining/Laboratory Testing Services
Attn: David McLay Laboratory
5555 DTC Parkway Flora Vista,NM 87415
Suite A-4000
Greenwood Village,CO 80111 Project Number 69121002
Material Information Sample Information
Source of Material: RWGBTP-02 Sample Date: 01/13/12 Sample Time: 1125
Proposed Use: Sampled By: Client
Sample Location: RWGBTP-02 1.5-3.0'
Sample Description:
Laboratory Test Data Result Specifications
Test Procedure: ASTM D1557 Liquid Limit:
Test Method: Method B Plastic Limit:
Sample Preparation: Wet Plasticity Index:
Rammer Type: Mechanical In-Place Moisture(%): 8.7
Passing 3/4"(%): 88.0
Passing 3/8 "(%): 76.0
USCS:
Oversized Particles(%): 24.0 Zero Air Voids Curve for Assumed Specific
Moisture(%): 1.0 Gravity 2.70
Sieve for Oversize Fraction: 3/8 130
w 129
G 128
Assumed Bulk Specific Gravity 127
of Oversized Particles: 2.65 g' 126
3: 124
Corrected for Oversized Particles(ASTM D4718) c 123
Maximum Dry Unit Weight(pcf): 128.3 122
Optimum Water Content(%): 7.9 25 120
Uncorrected Values 3 4 5 6 7 8 9 10 11 12 13 14
Maximum Dry Unit Weight(pcf): 127.2 Water Content(%)
Optimum Water Content(%): 10.9
Comments: Performed testing on samples provided by Mr. Dave McLay with Wildcat Mining Corporation to our Flora Vista,New
Mexico laboratory.
Services: Modified Proctor Test(ASTM 1557)and Moisture Content(ASTM D2216)
Terracon Rep.: Client
Reported To:
Contractor:
Report Distribution:
(I)Wildcat Mining Corporation (1)Terracon Consultants,Inc.
Reviewed By: r �'
Zachary St Jean
Test Methods: ASTM D1557
The tests were performed in general accordance with applicable ASTM,AASHTO,or DOT test methods. This report is exclusively for the use of
the client indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein
are only applicable to the actual samples tested at the location(s)referenced and are not necessarily indicative of the properties of other apparently
similar or identical materials.
C2o°06.s-z7-11.R-6 Page I of